Killerglass Pyrex Illuminated Radiator Hose FAQ's

[killerglass]

Contacting Killerglass

Best way is by creating a numbered support ticket here
http://www.killerglass.info/support/

Tim S or Kymberly A will get back to you useally within minutes during normal business hours

We have been having issues with emails going to the spam filter due to the hundreds of emails we get daily

Or simply use the contact us links on our site
Its very hard for us to follow all the posts and PMs we get across the internet.





Killerglass makes kits for ALL Scions


FAQ's

TC.. Same kit fits all years
XB.. 1st gen
XB.. 2nd gen Same kit will fit upper or lower hose
XA.. same as the XB 1st gen kit
XD.. kit will fit either hose on the XD. This is a strait secion and less expensive then the others




Some FAQ about antifreeze and LED colors

Antifreeze Colors

Antifreeze comes in a few colors

Red, Blue pink or Green

We like to recommend the highest quality products available.

The color LED should be the same as the antifreeze for best results.

To enhance antifreeze colors a drop or two of food color will add some depth to the color without any adverse reactions



Blue antifreeze is made by BMW and Engine Ice, Engine ice is the absolute best antifreeze our on staff chemist has tested. You can purchase at the Engine Ice website , mention Killerglass when ordering.

BMW is a very dark blue antifreeze and can be purchased at any BMW car dealer.



Green antifreeze is the most common and in our opinion looks the most radical of all colors glowing like a nuclear reactor. Green is made by world famous Prestone.

Dodge/Chrysler also make s dark green antifreeze that looks like lifesaver candy. Can be found at any Dodge dealer



Red and Pink antifreeze Toyota makes two antifreeze colors.



Red is called "long life" antifreeze thats the color of blood.

pn# 00272=1LLAC-01
$21.37 gal (mix with distilled or deionized water)



Pink antifreeze is called "extended life" that comes in most new model Toyota and the Scions.

pn# 00272-5LLC2

$16.82 gal (pre mixed, needs no water)

[squirrel]

Great product from a great company!

[BrideOfFrankenscion]

Wow! Those are cool! You have any for 350z?

[FrankenScion]

These are awesome, EVILDAVE has been rocking his for quite a while and I have wanted one since I saw his the first time on SL.

And Tim is a cool guy to boot. 8)


Everyone give a big Scikotic welcome to our newest sponsor. :kid:

[tCMetaLFReaK]

Those, sir... rock :bow:

Now all I need is $220!

[killerglass]

Wow! Those are cool! You have any for 350z?

We will custom make anything you want :bow:

[Anonymous]

Those, sir... rock :bow:

Now all I need is $220!

I have the money....now all I need is blue antifreeze.....

[BrideOfFrankenscion]

Wow! Those are cool! You have any for 350z?

We will custom make anything you want :bow:

:angel: Oh, Jon...... :angel:

[FrankenScion]

Wow! Those are cool! You have any for 350z?

We will custom make anything you want :bow:

:angel: Oh, Jon...... :angel:

Someone needs to keep their engine bay clean first. :lalala:

[mafiamike]

Holy shit, that's awesome.

[aZepolyn]

oh SNAP

thats hot... this goes on the shopping list, even at full price... I'd never thought of such a thing

[killerglass]

oh SNAP

thats hot... this goes on the shopping list, even at full price... I'd never thought of such a thing

Trade you one for that girl in your avatar :bash:

[killerglass]

I have the money....now all I need is blue antifreeze.....


Go to your nearby BMW dealership, they have the organic compound blue antifreeze that outspecs the Toyota brand.

:)

[Anonymous]

I'll go check it out and see what I can do......

[Anonymous]

Hows the installation on those?

[killerglass]

Hows the installation on those?


Pretty simple

All you need is to wire it in to a switch & use a hair dryer to shrink the clamps, everting your car heats up the clamps tighten themselfs so no need to touch them again. They are made by Gates radiator industrial division & are awsome.

You use your orig rad hose or we reccomend a new one, there only $18. Cut the center out & stick the glass in then re-install it like the picture below (thats not a Scion in the picture same deal though)

We reccomend using the same color LED as the antifreeze you want to use


Hope this helps :)

[EVILDAVE]

Here's a picture of the one in my car now.

http://img.photobucket.com/albums/v211/EVILDAVE666/Glasssterio006.jpg

[FrankenScion]

I can't wait to get mine in. :bash:

[mafiamike]

We should get 10 people that want them and get the scikotics logo etched in them! Good to know our antifreeze is already red. :up:

[Sciko Hubby]

That's a really cool looking product.

[killerglass]

We should get 10 people that want them and get the scikotics logo etched in them! Good to know our antifreeze is already red. :up:





If you guys just want the basic "Scikotics" logo I will be happy to put that on any order, even single tubes

If you want a custom logo then the "10 part" rule applies as we need to do artwork


:kid:

[mafiamike]

http://upload3.postimage.org/242882/KillerGlass.jpg (http://upload3.postimage.org/242882/photo_hosting.html)

Awesome! I'll be ordering one soon. Here you go!

If you can't use this, it's Broken 15 font (which can be downloaded from a "Sticky" in our General Discussions thread if you don't have it. The first i, the k, and the last c and s are reversed.

[killerglass]

http://upload3.postimage.org/242882/KillerGlass.jpg (http://upload3.postimage.org/242882/photo_hosting.html)

Awesome! I'll be ordering one soon. Here you go!

If you can't use this, it's Broken 15 font (which can be downloaded from a "Sticky" in our General Discussions thread if you don't have it. The first i, the k, and the last c and s are reversed.



I just take an image & do a UV exposuremethoed to create a stencil. The black will be the only part that shows, the white remaims untouched.

I have an all black version of this logo that will look much better :bow:



EDIT


I still didn't get my cookies

[mafiamike]

*there will be cookies at the Asylum. :up:

[killerglass]

*there will be cookies at the Asylum. :up:


Sweet :bow: :bash:

[BrideOfFrankenscion]

*there will be cookies at the Asylum. :up:


Sweet :bow: :bash:

Are you coming to Asylum? That would be sweet.

If you can't make it -- I might just have to mail some cookies to you.

[killerglass]

Where & when is the Asylum?

:bash:

[BrideOfFrankenscion]

Where & when is the Asylum?

:bash:
Tulsa, the weekend of June 17.

[mafiamike]

Shame on you! But since you're new, I'll forgive you. :loveit:

http://www.scikotics.com/viewtopic.php?t=4

[killerglass]

Shame on you! But since you're new, I'll forgive you. :loveit:

http://www.scikotics.com/viewtopic.php?t=4

Damn CRS of mine

Got to stop working 24/7, it's killing my brain :cry:

[FrankenScion]

http://upload3.postimage.org/242882/KillerGlass.jpg (http://upload3.postimage.org/242882/photo_hosting.html)

Awesome! I'll be ordering one soon. Here you go!

If you can't use this, it's Broken 15 font (which can be downloaded from a "Sticky" in our General Discussions thread if you don't have it. The first i, the k, and the last c and s are reversed.



I just take an image & do a UV exposuremethoed to create a stencil. The black will be the only part that shows, the white remaims untouched.

I have an all black version of this logo that will look much better :bow:



EDIT


I still didn't get my cookies

That's the old version of the logo Mike.
Here's the new version, I already got it toTim.

[killerglass]

Hi All


I'm extremely sorry, I did my math wrong on the price for the glass.
We had it at $230 it should have been $200.

Were also adding the basic Scikotic logo etched in the glass at no charge if you want it.

It has been changed in the first post

Sorry for the inconvience :bow:

[Anonymous]

How long does it take to make and ship these out?

[killerglass]

How long does it take to make and ship these out?



All glass is in stock

Engraving only takes 1-2 days extra at most depending on my work load.
:up:

[FrankenScion]

Hi All


I'm extremely sorry, I did my math wrong on the price for the glass.
We had it at $230 it should have been $200.

Were also adding the basic Scikotic logo etched in the glass at no charge if you want it.

It has been changed in the first post

Sorry for the inconvience :bow:

I think those are the kind of mistakes everyone likes......lol. :bow:

[mafiamike]

I know I like that mistake! Now how do I explain spending $200 on a glowing radiator hose to Niki when I don't have money to buy her a birthday present? :rofl2: I'm kidding, I've still got a couple months until then.

[aZepolyn]

wish I had a couple months ... I need to figure out a way to spnd $200 and be still front the greens for new furnature ... :(

[Frday13]

how much is it for the "custom" ones? i'm thinking something with a Jason Voorhees mask on it.

[killerglass]

how much is it for the "custom" ones? i'm thinking something with a Jason Voorhees mask on it.

If you give me a good picture to use & you can wait a couple days we'll etch it on for free

Were doing a batch this wed to be etched :up:

[cz3ch]

*there will be cookies at the Asylum. :up:
I'm on a diet

[mafiamike]

I'm ordering mine today!

[Anonymous]

Still haven't gone to BMW to check on the coolant......I will try to get that done inthe next couple of days. If I find that it isn't just insane to get done, I will order mine soon as well...... ;)

[ScionSniper]

Still haven't gone to BMW to check on the coolant......I will try to get that done inthe next couple of days. If I find that it isn't just insane to get done, I will order mine soon as well...... ;)

EvilDave is running the blue BMW coolant and it looks sick. I have the red LED hose, with stock Toyota coolant..

http://www.scionmafia.com/cpg143/albums/userpics/10001/DSC00001.jpg

and as you can see it looks sick!!!!

[killerglass]

Sniper

Yours looks so damn cool

We call that glass you have the worm

We put the same one on a car for a tv show

A bit of work to get it to fit but boy it looks awsome!!!

[mafiamike]

Tim, do you know if this will fit with the AEM CAI from the dealer?
http://upload4.postimage.org/262401/FromtheSide.jpg (http://upload4.postimage.org/262401/photo_hosting.html)
http://upload4.postimage.org/262403/GroundWires.jpg (http://upload4.postimage.org/262403/photo_hosting.html)

[killerglass]

Tim, do you know if this will fit with the AEM CAI from the dealer?


Sorry I dont know what that is?

If you have the stock radiator hose this will fit in it's place

Can you get me a better picture of the rad hose routing?



edit

OK I see it's a Air intake, if you have the stock hose it will fit
here's what the stock hose fits like
:)

[mafiamike]

Yeah, as you can tell, I decided it shouldn't be an issue....cause I ordered mine last night. :up:

[killerglass]

Thank you Mike

Your intense grafic design should be off the chain :bash:

[marinotc]

i want one in green. who makes green fluid?

[EVILDAVE]

i want one in green. who makes green fluid?

Prestone!

[FrankenScion]

Green fluid is a domestic thing.

[killerglass]

i want one in green. who makes green fluid?


You can use the prestone crap or the clear organic Mercedes fluid with Fluorescein dye in it like prestone puts in.

I have the dye if you need some :bash:

[mafiamike]

Thank you Mike

Your intense grafic design should be off the chain :bash:

I'm way excited! Niki was gonna try to be sneaky and order one from your website without telling me cause she heard me talking about them like...5 times! I'm really glad I got her to tell me what she was getting me for my birthday cause now it's gonna be even better!

[fujiz_xb]

killerglass you have mail.

[dredge38]

so besides cutting the tubes and stuff we have to drain and refill the fluid correct? also how much do are scions take? thanks

[mafiamike]

Greg, this just in. You're not allowed to buy any more glowy shit, Clay and I are still playing catch up. :rofl2:

[dredge38]

from the sounds of it i have to catch up to you two

[mafiamike]

Mine's getting shipped tonight! I'll post pictures after I install it. Thanks Tim!

Everyone else...buy KillerGlass. Right now. :guns:

[killerglass]

You have mail Mike

Sent you a pic I took, didn't want to post it here untill you seen it :up:

[FrankenScion]

I got my pic. :bash:


:wave:

[killerglass]

I got my pic. :bash:


:wave:


Both of you should have them thur or friday :md:

[EVILDAVE]

What pics?

[FrankenScion]

The pics of my killerglass. :kid:

[killerglass]

The pics of my killerglass. :kid:

That link just goes in circles :lol:

[FrankenScion]

But it's still cool.......lol.

Anytime someone types Killerglass, hose or hoses it takes them here.

[killerglass]

Hose this :lol: :lol:

that is so cool :rofl:


I think Dave wants to see the new etching we did on your glass, I'm not posting pic, it's your toy :bow:

[FrankenScion]

Hmm.....Dave just might have to wait. :lalala:

[mafiamike]

Think we should post our previews, Jon? I won't if you won't.

[EVILDAVE]

Hmm.....Dave just might have to wait. :lalala:

You suck!

[FrankenScion]

Hmm.....Dave just might have to wait. :lalala:

You suck!

Ha!

Return my PM and I might send you a pic.....lol.

[Lady Luck]

I want it...in green....who do I got to kill to get it? LOL. j/k. It's definately on my to get list!

[mafiamike]

I got mine in the mail today!

Here's some pics of my etching! I might get around to installing it tomorrow. :up:

http://upload4.postimage.org/369928/KillerGlass002.jpg (http://upload4.postimage.org/369928/photo_hosting.html)

http://upload4.postimage.org/369929/KillerGlass003.jpg (http://upload4.postimage.org/369929/photo_hosting.html)

http://upload4.postimage.org/369931/KillerGlass004.jpg (http://upload4.postimage.org/369931/photo_hosting.html)

http://upload4.postimage.org/369934/BeforeShipping.jpg (http://upload4.postimage.org/369934/photo_hosting.html)

Tim, you're the shit!

[BrideOfFrankenscion]

Jon got his too but he's still at work so I haven't opened it. :bash:

[dredge38]

I got mine too about an hour ago!

[dredge38]

so besides cutting the tubes and stuff we have to drain and refill the fluid correct? also how much do are scions take? thanks


No one answered my question :x: :cry:

[killerglass]

so besides cutting the tubes and stuff we have to drain and refill the fluid correct? also how much do are scions take? thanks


No one answered my question :x: :cry:


They take less then a gallon, Nows a great time to change it

I only use Toyota antifreeze for the red color, it's the best red antifreeze on the market

I reasearched them all :up:


When installing them try & leave extra hose then fit the glass before you put the shrink clamps on, the more hose you use the better the installation is.

What I am saying is if the glass is 8" long only cut 6" of hose out then you can cut more if you need to

[killerglass]

I got mine in the mail today!

Here's some pics of my etching! I might get around to installing it tomorrow. :up:




Tim, you're the shit!

Sweet Baby!!!!

Just want to push you guys over the top, this is the best group I have seen in a while :up:

[dredge38]

thanks that helps out, i tested the led :shock: and damn its bright i love it i cant wait to install it :bow: :bow:

[killerglass]

thanks that helps out, i tested the led :shock: and damn its bright i love it i cant wait to install it :bow: :bow:

Yes, those LEDs are the bomb we have them custom made to our specs $$$ but well worth it.
I also can get you these leds that are about the size of a quarter with a sticky pad on the back or with mounting screws.

Just follow the instructions I posted here about leaving extra hose & you'll have an awsome installation

Again~
THANK YOU!!!!! For trying our product :up:

[FrankenScion]

I got mine too, looks freakin awesome! I'm hoping to install it tomorrow.

But I need to find some green radiator fluid on a Sunday and that may not be easy around here.......lol.

[killerglass]

I got mine too, looks freakin awesome! I'm hoping to install it tomorrow.

But I need to find some green radiator fluid on a Sunday and that may not be easy around here.......lol.


Awsome

NO PROBLEM with green

The Prestone antifreeze in the yellow plastic jug will do you

If you want it greener I can send you some florosien dye to really light it up

Also Jon, I have another package on the way to you with more goodies for the show :up:

[FrankenScion]

Cool, I hope it makes it in time, my mail carrier sucks. And thats coming from a mailman. :rofl2:

[killerglass]

Cool, I hope it makes it in time, my mail carrier sucks. And thats coming from a mailman. :rofl2:

I ship everything Priorty or overnight if I have any doubts

You will have more toys!!!!!!! :bash:

[FrankenScion]

More toys is always good! :mj:

[Anonymous]

so besides cutting the tubes and stuff we have to drain and refill the fluid correct? also how much do are scions take? thanks


No one answered my question :x: :cry:


They take less then a gallon, Nows a great time to change it

I only use Toyota antifreeze for the red color, it's the best red antifreeze on the market

I reasearched them all :up:


When installing them try & leave extra hose then fit the glass before you put the shrink clamps on, the more hose you use the better the installation is.

What I am saying is if the glass is 8" long only cut 6" of hose out then you can cut more if you need to

Being you researched them all........someone said BMW antifreeze for blue. Is that the best one? And 1 gallon for a tC as well, right?

[killerglass]

Being you researched them all........someone said BMW antifreeze for blue. Is that the best one? And 1 gallon for a tC as well, right?

Yes BMW for blue

Mercedes for a clear with a pink tint

Prestone also makes a clear one thats pretty good, cant remember the name off hand

[SIR]

Is there any chance of getting it with a PINK LED?

:pilot:

[FrankenScion]

Would do you any good if unless you can find pink anti-freeze..lol.

[mafiamike]

Mercedes for a clear with a pink tint

[FrankenScion]

Mercedes for a clear with a pink tint


:doh:

[killerglass]

Is there any chance of getting it with a PINK LED?

:pilot:



Let me see what I can come up with, I think it's a great idea.

We have an in house chemist that may be able to whip up some coloring for the antifreeze

As far as the led's pink is not a primary color & hard to come up with, I know I can do it with an RGB led set but that would double the price of the glass.

Give me a week to research this with a few of my connections, I'm sure we can come up with something cool. :up:

[Killermethod]

just wondering how these hold up in the Northeast as far as frezzing in the winter months. hot - cold ratio!

[killerglass]

just wondering how these hold up in the Northeast as far as frezzing in the winter months. hot - cold ratio!

No issue what so ever with heat or cold


-------------------------------------

What is Pyrex Glass?


Thanks to a railroad glass scientist needing to create a lantern that got hot but did not shatter when rain or snow got on it we now have pyres glass. The word Pyrex comes from the Greek Word pyro or fire, and Ex which refers to the type of glass. It does not expand or change shape when heated. This may be why Pyrex glass in the 1960s and '70s was used in the windows of the Apollo and Gemini spacecraft.


Composition of Pyrex Glass:
Density (g/cm3) = 2.23000E+00 Mean Excitation Energy (eV) = 134.000000



Properties Of Borosilicate (PYREX 7740) Glass Chemical Resistance Borosilicate glass is inert to almost all materials with the exception of hydrofluoric acid, hot phosphoric acid and hot alkalies. Of these, hydrofluoric acid has the most serious effect and, even when a solution contains a few parts per million, attack will occur. Phosphoric acid and caustic solutions cause no problems when cold but at elevated temperatures corrosion occurs. Caustic solutions up to 30% concentration can be handled safely at ambient temperatures. Physical Properties: Composition Low-expansion borosilicate glass has the following approximate chemical composition:

SiO2 81%
Na2O 4.0%
K2O 0.5 B2O3 13.0%
Al2O3 2.0%

For further details please refer to ASTM E 438, "Standard Specification for Glasses in Laboratory Apparatus." Linear Coefficient of Expansion: Between 32?F and 572?F [0?C and 300?C], per ASTM Method E 228) 18.1 x 10-7 in/in/7?F 32.5x10-7 cm/cm/?C Annealing: All fittings and all straight lengths are annealed to reduce internal stress. This also makes the pipe easier to field fabricate. Thermal Conductivity: 0.73 Btu/hr-ft2-?F/ft 0.0035 cal/sec-cm2-?C/cm Specific Heat: 0.20 Btu/lb-?F 0.20 cal/gm-?C Dialectric Constant: at 23?C and 1M Hz per ASTM Method D 150: 4.6 ?-0.2 Density: Approximately 139 lb/ft3 (2.23 gm/cm3) Young's Modulus: per ASTM Method C215: in the range of 9 x 106 to 10 x 106 psi. Mechanical Strength: The mechanical properties of glass differ from those of metals. The lack of ductility of glass prevents the equalization of stresses at local irregularities or flaws and the breaking strength varies considerably about a mean value. This latter is commonly found to occur at a tensile strength of about 70 kg/cm2 (1000 psi). The glass should be adequately supported and appropriate allowance should be made for special conditions such as high temperatures, dense liquids, etc. Subject to the above, maximum working pressures are as specified in the following table. Working Temperatures Borosilicate glass retains its mechanical strength and will deform only at temperatures which approach its strain point. The practical upper limit for operating temperatures Is much lower and is controlled by the temperature ditterentials in the glass, which depend on the relative temperatures of the contents of the equipment and the external surroundings. Provided borosilicate glass is not subjected to rapid change in temperature, creating undue thermal shock, it can be operated safely at temperatures up to 450?F (232?C). The normal limiting factor is actually the gasket material. The degree of thermal shock (usually defined as sudden chilling) which it can withstand depends on many factors, for example: stresses due to operating conditions; stresses imposed in supporting the equipment; the wall thickness of the glass, etc. It is therefore undesirable to give an overall figure but, as a general guide, sudden temperature changes of up to about 216?F (120?C) can be accommodated At sub-zero temperatures, the tensile strength of borosilicate glass tends to increase and equipment can be used with safety at cryogenic temperatures.


Chemical Hardening

Killerglass is chemical hardened by our three step hardening process to increase the impact resistance of the borosilicate glass 300-400%
Making this the ideal product for severe duty applications.

[Killermethod]

Thanks For the Quick reply Just got someone buying my old Winter beater and looking for cool stuff to do with the XB . this would be sweet for the Northeast as NO One will have this Done !

[killerglass]

Thanks For the Quick reply


My Pleasure

We aim to please

:up:

[FrankenScion]

http://i14.photobucket.com/albums/a305/FrankenScion/100_1014.jpg

Pimptatstic!


Pics don't do it justice, seriously.

[killerglass]

Damn that looks great!!!

Get some good night shots for me & we'll put it on the killerglass.com site

Green rules!!! :up: :up:

I been waiting all weekend to see it installed, Man I need to get out more :crazy:

[FrankenScion]

I don't understand why its still upside down...lol.
I rotated it on Photobucket. :roll:

[mafiamike]

I might do mine tonight, dunno...all this internet Summer School that I'm obviously not doing cause I'm posting here.

[whatmovesu]

Is there any chance of getting it with a PINK LED?

:pilot:



Let me see what I can come up with, I think it's a great idea.

We have an in house chemist that may be able to whip up some coloring for the antifreeze

As far as the led's pink is not a primary color & hard to come up with, I know I can do it with an RGB led set but that would double the price of the glass.

Give me a week to research this with a few of my connections, I'm sure we can come up with something cool. :up:

Could you do purple by having red antifreeze with a blue led? Let me check and see what I come up with. How about mixing antifreezes to create different colors.

[FrankenScion]

As far as I know you are not supposed to mix different color anti-freezes.

[FrankenScion]

Damn that looks great!!!

Get some good night shots for me & we'll put it on the killerglass.com site

Green rules!!! :up: :up:

I been waiting all weekend to see it installed, Man I need to get out more :crazy:

Will do!

[killerglass]

How about mixing antifreezes to create different colors.

Not advisable, there are 3 different types of antifreeze they use today & need to be kept alone to keep at spec, plus you dont want to have any electrolysis issues.

Let me see what I can do, pink sounds mean

[SIR]

Oh, and killerglass, I am 'in deep' with Fujiz if that makes a diff. at all.
And I'm in Palm Springs, so could I get help installing it if I came there?

[killerglass]

Oh, and killerglass, Tim I am 'in deep' with Fujiz if that makes a diff. at all.


Deep ahh :rofl2:

No sweat man, I really dig the idea of running pink fluid, thats a great idea

If your willing to run it I'll do my best to make it :up:


BTW got a pic of your ride?
I may get more ideas

[SIR]

Pics of my ride :D
By 'In Deep' I mean I am his #1 agent (sponsoree)
Oh, and I am in Palm Springs...so would it be cool to come see you, to get some help installing?

http://i7.photobucket.com/albums/y283/SirScion/d4465af4.jpg

http://i7.photobucket.com/albums/y283/SirScion/76daadd8.jpg

http://i7.photobucket.com/albums/y283/SirScion/Sam001.jpg

http://i7.photobucket.com/albums/y283/SirScion/0c301634.jpg

[FrankenScion]

Did you take those pics during the earthquake Sam? :wink:

[SIR]

:rofl: no, the ones at night were taken with a slow exposure, so the lights would show up better, and I didnt feel like getting out the tripod.

[FrankenScion]

Couple o better pics. Its tough to take dark pics without them looking blurry.......lol. :oops:

http://i14.photobucket.com/albums/a305/FrankenScion/Misc/100_1028.jpg
http://i14.photobucket.com/albums/a305/FrankenScion/Misc/100_1013.jpg
http://i14.photobucket.com/albums/a305/FrankenScion/Misc/100_1031.jpg

[SIR]

hate to say 'I told ya so'.... :D

[killerglass]

Jon

Is the glass lighting up the entire engine compartment in the bottom picture or you have another light in there?

[FrankenScion]

I have 4 12" cathodes in the engine bay also, thats probably part of my pic problem.
But, I have them all wired together so I can run them off the same switch. :oops:

[Killermethod]

Those are F'n sweet Jon I going to have to get the Blue myself now to Match my whole scheme> Damn Tight !

[FrankenScion]

It's an easy install too. I took my time and with clean up and hiding the wires it took me about an hour and a half.

[Anonymous]

Ok. I am sold. My local BMW dealership was not open when I went to get antifreeze so I am going to try today.

[killerglass]

Sheep, if you want any extra grafics get them to me asap, Were closing the shop from thursday for 5 days, wuld like to get you hooked up asap

I take a vacation but I will be working :md:

[scionpilot]

I take a vacation but I will be working :md:

Your a pilot too? Anytime I go on a vacation it is probably cause I was/am working.






And what about the earthquake? Last week I felt my first one while I was in Palm Springs :shock:

[killerglass]

Your a pilot too? Anytime I go on a vacation it is probably cause I was/am working.






And what about the earthquake? Last week I felt my first one while I was in Palm Springs :shock:

Nahh Just a lonely protype engineer

Those quakes I love them, cant get enough

Now only if you can get a thunderstorm with them :up:

[SIR]

Your a pilot too? Anytime I go on a vacation it is probably cause I was/am working.






And what about the earthquake? Last week I felt my first one while I was in Palm Springs :shock:

OMG! you were here?! Dang it....you should come again soon and we could hang out :D I am so desperate to have Scion friends... :(

That was a little quake huh? Kinda fun, like standing on a Trampoline with someone hitting the edge with their hands.

[killerglass]

Is there any chance of getting it with a PINK LED?

:pilot:


OK I have a solution for you

I have some hot pink trace dye ordered for antifreeze & found some hot pink LEDS


This will be the wildest one yet!!!! :up:

[SIR]

OMG OMG OMG!!!! how much will all that custom shizzit be???? :flinching:

oh, you said that you could not do custom etching unless it is in large quantity right? If so, dang, I wanted the fujiz F

[killerglass]

OMG OMG OMG!!!! how much will all that custom shizzit be???? :flinching:

oh, you said that you could not do custom etching unless it is in large quantity right? If so, dang, I wanted the fujiz F


We do charge an extra $30 for etching as long as you have a graphic thats cool to use.


I just want to get Y'All rocking with this :up:

BTWI just orderend the hot pink dye, I should have it end of next weeek, special order from Europe, I'll see if it works

[SIR]

I mean extra for the Pink LED and the dye....all together, how much will that cost?

[killerglass]

I mean extra for the Pink LED and the dye....all together, how much will that cost?


Same price, I'm doing this because it's a great idea & putting the pink on my wifes car also

I just need to test the dye when I get it, should not be a problem it's the same compound they use to tint antifreeze

[SIR]

OK, I cant get it right now, as both my sugar daddy and I are strapped for cash for about a month. :rofl2: LOL. But this is DEF. my next mod!

[killerglass]

OK, I cant get it right now, as both my sugar daddy and I are strapped for cash for about a month. :rofl2: LOL. But this is DEF. my next mod!

Cool, I should have the bugs worked out by the time your ready

Word of advice/ get a sugar daddy with deep pockets, I found my sugar momma :blink2:

[SIR]

LOL, both of our money is going into the buisness right now....how about you loan me your sugar momma for a couple weeks ;)

[killerglass]

Killerglass decals are now avalible

White or blue vinyl die cut 12x2.25 inches

If you would like a one for you car PM me your address & we'll send it out


Thank you


:blink2:

[SIR]

I want one, but I refuse to put a sticker on my car unless I am:

A: sponsored by them (hint, hint)

OR

B: Have that part in my car....

[killerglass]

I want one, but I refuse to put a sticker on my car unless I am:

A: sponsored by them (hint, hint)

OR

B: Have that part in my car....

We get on on your box, Mr Pinky :up:

[SIR]

LOL, I am so excited to start moding again!!!

[elegancecustomz]

what about a white led.....instead of red, green or blue....

all my lightning is white and don't want to throw it off like that...

[killerglass]

what about a white led.....instead of red, green or blue....

all my lightning is white and don't want to throw it off like that...


It would still light up whatever color antifreeze your using, if you had red it would be red, etc

They make an almost clear antifreeze (mercedes) that we can put a clear LED in but it will never be clear as water.


:)

[killerglass]

Were having a sale!!!


We just bought a new automated glass machine that reduces our overhead on making these Pyrex Killerglass along with many scientific uses for our main business.This thing will also form threads on glass, it rules!!


As a result we dropped our list price from $259 to $229. Members cost for all Scion models is now $175

You can order by PM 'ing me
We take PayPal or Credit Cards


Original post on this also edited

http://www.scikotics.com/viewtopic.php?p=23845#_Single_Post_View


:up:

[SIR]

OMG I want mine so bad :(

[tCMetaLFReaK]

oooooooooooo ok, the gps can hold off for another few months... and what do you mean by "make threads"?

[killerglass]

and what do you mean by "make threads"?

We can now form threads like 1/2 x 20 threads like a bolt on glass so the glass is acually threaded.
This is for production scientific glass which is our main business. If you have a bunch of glass you need made for a lab were your place :up:

[tCMetaLFReaK]

oooo sweet!

[SIR]

so yeah...you need to talk to your 'Scionpro' guy, he is marketing his KillerGlass as an 'EXCLUSIVE'

He sickens me.... :rofl2:

[satmax]

OMFG I just saw this in person on THMFIC's xB... Fuckin' UNREAL.

I WILL be getting one before that sale is over.

I have never seen anything so original. :up: :bow:

Now, imagine one of the open engine hot rods with these things on it rolling around at night... drool & shit...

[SIR]

yes, they are VERY VERY hot....

[killerglass]

Just a bump here

We have changed the design of our glass for incresed performance
I edited the first post to reflect this change

Any questions feel free to contact me
have a great glassy day :)





From: Glass engineering dept
To: Retailers, Distributors


Killerglass came up with a new way to install the LEDs so they can be
easily replaced.

It has come to our attention that while heating the shrink clamps people
have been overheating the LED's during installation causing premature
failure. We cant have this.

We now use a strap system (just like a small black wire tie) that holds
the LED in place and makes it easily changeable if it burns out or you
want a new color.

You can add mutable LEDs also that allow you to make different effects
with the colors.

Warranty Procedure:

Retrofits are available to lights that burn out within 1 year from
purchase.
End user must cut off at the LED & send back to Killerglass the complete original wire harness with the little voltage regulator with what color LED it was.
You will be sent a replacement when that is received.

[killerglass]

Just wanted to post some video of a Hhmm Hhmm Toyota

Click to play :)


http://video.google.com/googleplayer.swf?docId=5884582711091021737&hl=en

And heres a Turbo TC from overdrive-performance.com here in Rosemead Calif

http://upload4.postimage.org/959908/SMPicture_001.jpg (http://upload4.postimage.org/959908/photo_hosting.html)

[FrankenScion]

Cool!

[satmax]

Awwww YEAH!

Just got my glass in the mail today! Gotta wait until my new hose comes in to install it though.

I took it to work to show some doubtfuls and they went ballistic over it! One guy has a CBR600 and wants one on his
bike. I hooked the glass up to our hydraulic test stand's water chiller and ran water through it while holding a blue LED up to it. AWESOME. I think I have some potential customers for you Tim. :D

I have a show at the base this Saturday and hope to have it installed by then. There's always a bunch of PT Cruisers at the show so perhaps they'll be bitten by the bug when I tell em you make em for PTs too. lol

[killerglass]

I hooked the glass up to our hydraulic test stand's water chiller and ran water through it while holding a blue LED up to it. AWESOME.

:rofl: Too funny, I do the same thing :up:

I still check out every glass & light it up to see how it looks :up:

[Neothin]

any chance that a poor college student could still get in on the $175 deal?

i'd love a blue one w/ "scion" etched onto it <3<3<3<3<3

[killerglass]

any chance that a poor college student could still get in on the $175 deal?

i'd love a blue one w/ "scion" etched onto it <3<3<3<3<3

Yes why not :up:

[satmax]

I got it installed about a week ago. Was super easy putting the hose and glass together. Was a bitch getting those wierd Toyota clamps back on the hose at the engine side.

But... it's hot and makes the panties drop.

http://img170.imageshack.us/img170/7122/p1010195rk1.jpg
http://img170.imageshack.us/img170/9035/p1010206ao8.jpg

[Neothin]

http://host179.ipowerweb.com/~importeq/catalog/catalog/images/428-v4-scion-tc-and-xb-viso.jpg

any chance of getting something like that tC outline etched onto my piece?

where exactly do we order from? killerglass.com and put something about being a scikotics member in teh comments box?

[FrankenScion]

New pics of mine taken at the Roswell show. 8)

[satmax]

WTH Jon, how are you posting pics? lol Do you use the forums image poster doo-hickey? I guess I'll try it again...

[FrankenScion]

Just scroll down when posting a reply and hit add attachment. It will add the pic straight from your computer, no need for photobucket or someting like that.

[satmax]

Yeah, I saw the FAQ on how to use the add an image around the forums here somewhere.

I usually have Image Shack host it and post in the forums with the ol' {img}blah blah blah{/img}.

When I get home from work I'll edit my post above to try it out. Java doesn't work for some reason on my desktop, probably because Microsoft doesn't like the fact that I'm using a pirated version I bought in Thailand, those buttholes.

[satmax]

Let's try this again... lol

I love this thing...

Edit: WTF, I hate Microsoft Paint, I resize it to fit, looks fine after I save and it's cropped when posted... oh F-it... you can see what I wanted to take a picture of...

[killerglass]

I love that look with the fibre cover


Jons looks just plain sick in green, very cool pic

I downloade dboth for our adds :up:

[satmax]

I'll send you the original pics so you can see the glass better.

[FrankenScion]

I'm waiting on the originals to get sent to me and I will send them in.

[killerglass]

Would love the origianls

Send them to me :bash: :bash:

[Neothin]

well, i ordered mine last night, should be shipped by the weekend.

wooooooot!!!!

[FrankenScion]

Would love the origianls

Send them to me :bash: :bash:

Me too.....lol.

[satmax]

Would love the origianls

Send them to me :bash: :bash:

Tim, can you give me an e-mail addy to send them to?

[killerglass]

Tim, can you give me an e-mail addy to send them to?

Tim@killerglass.com :bash:

[killerglass]

Killerglass

More then just radiator hoses

We just want to show Y'All that killerglass is more then just radiator hoses

Here's a project we completed last week for a seek & find mission south of the Gulf of Mexico

These camera housings are made of the same killerglass material as the hoses for cars.
The engineering for these tubes were to withstand depths of 2000', here is a picture of them at 3000' at the bottom of the ocean, 1000' deeper then designed. Your killerglass hoses spec out about the same if the ends were sealed.

If you need camera housings for 3000' depths, call us :D

[FrankenScion]

Kick ass!

[whatmovesu]

That is dope :bow:

[satmax]

Put some LEDs in that thing and it would be dope unda tha sea!!

[FrankenScion]

PM me for the newest pricing on these, price is only good til xmas!

[killerglass]

PM me for the newest pricing on these, price is only good til xmas!


Like he said, as a thank you for all the help we are busting a nut to get these things to Y'All Scikotics

The price will never be lower :up:


PLEASE keep this price to yourself or my retailers will kill me 8)

[06xb30]

tim , thats sweet

[killerglass]

Just wanted to bup this to say we have the lowest possible price untill Christmas for members here. PM Jon for the price :)

[FrankenScion]

Word.

[Joe xtC]

PM'd

[06xb30]

Tim , i just want to thank you for the Hose ( it looks sweet) and the quick shipping
cant wait to get it installed ..

[killerglass]

Your very welcome

I dont even remember sending it out LOL ;)

[06xb30]

Your very welcome

I dont even remember sending it out LOL ;)


well all that matters is you did ..:bash:

[El_Jorge]

Finally got mine done. Thanks to my buddy Harrison for helping too.:clap:
http://i14.photobucket.com/albums/a344/primer44/stoof008.jpg

[FrankenScion]

The Heineken touch is awesome!

[El_Jorge]

Thanks!!

Killerglass kicks ass!!! Got me alot of attention a todays car show.

[BrideOfFrankenscion]

:hiding: I want one.

[06xb30]

i have to find time to get ours installed , but it looks great in the box ..

love the Heine thats great ..

[killerglass]

Finally got mine done. Thanks to my buddy Harrison for helping too.:clap:


That looks AWSOME!!!!!

[ROFL Box]

now could you do one that only lit up as the confederate flag to go with my battery cover in the engine bay

[El_Jorge]

That looks AWSOME!!!!!


Thank you. I will try to get better pics and send them to you.

BTW: Think you can send me some black decals?

[killerglass]

Thank you. I will try to get better pics and send them to you.

BTW: Think you can send me some black decals?


Cool, look forward to the pics

We cut some black decals today, I'll get some to you :)


Rebel Flag

Just get me the artwork you want

Whatever is etched shows up brighter then just the hose, just like the ones posted here

[El_Jorge]

here's a better pic:
http://i4.photobucket.com/albums/y132/primer665/10.jpg

[dj short-e]

so you CAN change the color of the coolant? Cuz with red lights on my glass it still comes out PINK! GRRR.. I WANT RED DAMNIT! haha

[FrankenScion]

Yes, you absolutely can.

[El_Jorge]

so you CAN change the color of the coolant? Cuz with red lights on my glass it still comes out PINK! GRRR.. I WANT RED DAMNIT! haha

Yup...I got prestone like Jon:mrgreen:

Although I dont know how you can make you coolant more red

[killerglass]

Short-e

Just go to Toyota & get the red antifreeze $12 a gallon

Mix with distilled water NOT tap water or you will screw up the system, to many minerals in tap water that starts calcification ofg the system :)

[dj short-e]

Short-e

Just go to Toyota & get the red antifreeze $12 a gallon

Mix with distilled water NOT tap water or you will screw up the system, to many minerals in tap water that starts calcification ofg the system :)

EXCELLENT! Thanx tim.. i'll get some pix of the finished product at the show this weekend and post some pix next week! :) Oh ya, come by and say HELLO while you're there.. all our car will be together right next to the showroom.

[jwaj2002]

ok what do you need to know before I place my order? I have the money now but it'll be tuesday before I can send it

[killerglass]

ok what do you need to know before I place my order? I have the money now but it'll be tuesday before I can send it


Just color & hwat model and any etching if you want that done :)

[jwaj2002]

ok is the etching extra?

[killerglass]

ok is the etching extra?

If it's just simple stuff we throw it in free for the members here :)

[jwaj2002]

well I obviously want scikotics arkansas on it, but how much to get the maltese cross on it as well?

[killerglass]

If you can get me a usable picture we'll do it.

Has to be something thats vinyl cutter acceptable

[jwaj2002]

http://www.westonsigns.com/Images/Items/WSCFF009.jpg

or

http://www.westonsigns.com/Images/Items/WSCFF044_PINK.jpg

you don't have to do the words that are in them but I wouldn't mind the american firefighter on it like in the first one

[killerglass]

Sorry, those are not good

They have shading on them, we can only do one color solid like the scikotics logo

example:

[jwaj2002]

yea I don't want the shading

http://www.fireandrescuedecals.com/images/fr-040.gif

how bout that?

[killerglass]

Yes Sir

That will work

[jwaj2002]

how much will it be to have that added but in place of fire dept american fire fighter?

[killerglass]

how much will it be to have that added but in place of fire dept american fire fighter?



Best deal is to have someone with photoshop do it, I'm sure it cant be too hard.
Our art person is away untill after new years

[jwaj2002]

well I'll wait then to order it till he gets in, how much is it usually to add custom stuff like that?

[jwaj2002]

I'm wanting that etched into the killer glass like the guy that got the heiniken thing done to his

[El_Jorge]

That guy with the Heineken thing is the koolest. lol

jwaj2002: What did you want to change on the design? I could prolly fix it for you.

[jwaj2002]

where it says "fire" and "dept" I want it to say "American" in place of fire and "Fire Fighter" in place of dept, thanks for the help I want to get it paid for so I don't spend the money on something else

[El_Jorge]

This okay?
http://i14.photobucket.com/albums/a344/primer44/FIREFIGHTER.jpg

[jwaj2002]

hell yea thats great

[El_Jorge]

Kool! Glad I could help. Now go spend that cash. Its worth it. Trust me.:mrgreen:

[jwaj2002]

lol I know it will be I've wanted one for months now, my car will only be 50% come asylum but thats one of the biggies right there

[xBvegan]

Tim,
I sent you a PM.

[dj short-e]

Um ya, I love mine! haha...

http://i2.photobucket.com/albums/y30/djShortE/DSC_1299.jpg
-
http://i2.photobucket.com/albums/y30/djShortE/DSC_1300.jpg
-
http://i2.photobucket.com/albums/y30/djShortE/DSC_1302.jpg
-
http://i2.photobucket.com/albums/y30/djShortE/DSC_1270.jpg

[Big-Kokujin]

Can't wait to install mines...just waiting on the coolant...should be in today

http://img145.imageshack.us/img145/2140/killerglassph4.jpg

[jwaj2002]

got mine installed yesterday finished it today it looks freakin awesome

though I do want to know why the led wires are so dang tiny

[killerglass]

They take very little amperage, those wires are rated 400% past the actual requirement.

:)

[jwaj2002]

oh, well might not be a bad idea to make them a little or add some connections to the ends I had a hard time finding ones that would fit

[Killermethod]

Finally ordered my can't wait to get it !

[chrimsonfyre]

How much is the killer glass in red for the 2005 tC? How would I go about ordering it?

[dj short-e]

How much is the killer glass in red for the 2005 tC? How would I go about ordering it?


Call TIM @ KillerGlass. He'll hook you up! :)
310-344-4458

[FrankenScion]

Or you can PM him, his screen name is killerglass.

[_Keith_]

Thanks Tim I will be waiting for it!

[Krzd1]

Has anyone installed a KG in there tC with a SC in it? One of our guys did a test fit and it looks like the SC is in the way.

[erikarene]

Has anyone installed a KG in there tC with a SC in it? One of our guys did a test fit and it looks like the SC is in the way.

anyone....my boy wants to order a KG for his supercharged tc but when he matched mine up to his it doesnt fit......

[dj short-e]

anyone....my boy wants to order a KG for his supercharged tc but when he matched mine up to his it doesnt fit......

I think tim modifies the tube if you have a SC. I don't think its the regular Tc tube.

[Krazylowgsx]

I'm glad you guys are getting your killerglass hoses... I'm going on like 7 months waiting for mine

[_Keith_]

Theres no tube for a SC tC ... not much room for the glass..

Also........ If you ordered one and havent recieved it... shouldnt you contact him?

[FrankenScion]

Theres no tube for a SC tC ... not much room for the glass..

Also........ If you ordered one and havent recieved it... shouldnt you contact him?

He doesn't have a SC tC, but ya you would think that method would work best. Tim has always been very fast with shipping for everyone else, something screwy must have happened.

[jwaj2002]

yea, it could have gotten lost in transit, mine took about a month though a week or 2 to make since he was behind then 2 weeks shipping longest month ever

also he has one for the cobalt ss it isn't listed on his site, I bet he has one for the super TC too

[_Keith_]

yea, it could have gotten lost in transit, mine took about a month though a week or 2 to make since he was behind then 2 weeks shipping longest month ever

also he has one for the cobalt ss it isn't listed on his site, I bet he has one for the super TC too

He doesnt have one for the SC tc....

[MuNkY]

I have a question about these.. how would they do in (extreme) cold weather? any idea?

[FrankenScion]

How do Pyrex glass dishes do in the freezer?

[jwaj2002]

they get really really cold

I would imagine since it said on my paperwork - 90 degrees c, just fine, but if your worried about it taking a bit longer for your car to warm up, you could wrap the glass in some heat resistant cloth and tape it on

[MuNkY]

How do Pyrex glass dishes do in the freezer?


it gets much colder outside some days than in my freezer LOL (-30 to -40 F), thats why i was wondering. but i guess i have nothing to worry about, if it breaks its under warranty i guess right?

[jwaj2002]

hold on let me check and see what KG says about temp range


dang can't find the info, you could always call and ask them or send him an e-mail/p-mail

[fightinsk8ers]

question so does anybody know if you have to put in a switch for your killerglass???????? mine is on the way and i was wondering? thanks

[jwaj2002]

you can, mine is wired in with my halos

[fightinsk8ers]

ok but if you leave them on all the time will the led burn out???????? help[!!!!!!!!!!!!!

[jwaj2002]

nope, and its only on when my headlights/marker lights are on basicly

[firstkingofbeer]

I was just wondering if yall (killerglass) are or have thought about making a hose for the lower radiator hose for the tC? I live in Guam and the people here love the upper one and always ask why i dont have one for the lower hose. lol so i figure if you are planning on making one i will be planning on buying one. thanks guys!

[KILLERGLASS1]

Hey Ryan-
The lower hose is available if you're interested shoot me a PM and I'll get ya takin' care of!
Take care-
John

[tCMetaLFReaK]

John... respond to my email dammit! :D

[fightinsk8ers]

HEres my glass!

http://i240.photobucket.com/albums/ff169/fightinsk8ers/P1000173.jpg


http://i240.photobucket.com/albums/ff169/fightinsk8ers/P1000172.jpg

[KILLERGLASS1]

HEres my glass!

http://i240.photobucket.com/albums/ff169/fightinsk8ers/P1000173.jpg


http://i240.photobucket.com/albums/ff169/fightinsk8ers/P1000172.jpg


Nice Craig! Really like the etching on it!

[08_xbeezy]

picked up my glass yesterday!!! i will post pics tom after i install it!!!:dance:

[Rome Crak]

hey to whom it my cancern

hey im the CPR of the altus, chapter of scikotics i was jus wondering we r having a car show on the 16 august i now its a short notice but if there is any thing u can do to help us out with some stuff man i would gratly appricate it you can reach me at 580-481-0511 or 580481-0508 my name is Rome thanks


Rome CPR

[Tronic]

So what's the current price for Scikotics members? The last thing I saw was $175.

[Vanniek71]

I'm not sure I know they offered super sweet pricing for the Asylum show, i grabbed mine then

[Tronic]

I'm not sure I know they offered super sweet pricing for the Asylum show, i grabbed mine then

If I could get it for that "super sweet" price (wink wink) I'd grab it in a second but would understand if that deals not going on anymore.

Anyone have the current sciko price for the tc killer glass?

[killerglass]

They are $140 with free shipping this month

PM me if you need one