2006 xB Greddy supercharger install

[vettereddie]

I will be modifying the 04-05 xB Greddy supercharger kit and installing it in a 2006 xB this weekend. For those who don't know, Scion changed the xB ECU for the '06. I have gotten the '05 and '06 ECU diagrams ftom Scion, and the eManage blue wiring diagram from Greddy. All but three wires need rerouting, and some conductor paths need to be restored to stock configuration after cutting the piggyback harness. Also, Greddy is suggesting installing their O2 sensor adapter to aleviate error code activation. I will post how it goes, if the Greddy O2 sensor is needed (Scion uses the same sensor for 05 and 06), and will provide a pin out for rewiring the harness for those who request it, just send me a message.

Has anyone else attempted this, and if so, were you successful?

[vettereddie]

Success! No modification was needed to the stock Greddy hardware provided with the kit. Harness did need a complete rewire with the exception of two pins. O2 sensor was not installed and no error codes have tripped. it is beyond me why Greddy has not put out an '06 harness since it uses the same connectors, only the wires need to be swapped. if anyone needs info on how to do this, please PM me.

[FrankenScion]

Keep us updated, I know someone that had the wiring diagram from Greddy to convert to the '06 if you need it.

[vettereddie]

Posted the technical details on Scionlife. http://www.scionlife.com/forums/viewtopic.php?t=165690&highlight= (http://www.scionlife.com/forums/viewtopic.php?t=165690&highlight)

[slimsdizz]

congrats on your install I am a huge fan of superchargers and know you are just getting started with it but congrats.