Exhuast help

[Sushi_x]

My catback system is giving a slight rattle while i idle

is it because of how its sitting under the car or what?

does anyone else have this problem?

[NFSAST]

Check these things 1st:
-Are the bolts torqued?
-Is your catback aligned with the gasket?
-Has your catback shifted location from the rubber hanger?
-Dose your catback have any leaks/damage?
-Is their any odd shaped debris that might be inside caught on metal/something?
(I got an Injen catback @ April09 and their nothing wrong with it.)

From: Anchal aka NFSAST (Atl,Ga)
8-26-09 9:45AM

[Sushi_x]

well if im right when bolts get really hot then cold often they tend to loosen up so im sure its just that
but thanks ill use this as a check list

[NFSAST]

well if im right when bolts get really hot then cold often they tend to loosen up so im sure its just that
but thanks ill use this as a check list


"No problem,I hope u can fix the problem!"
"Let me know what it was and how U fixed it?"


From: Anchal aka NFSAST (ATL,GA)
8-27-09

[Sushi_x]

just needed some elbow grease and i had to realign the rubber hangers



thanks alot

[NFSAST]

"No problem at all!" "By the way what brand is your catback?"

From: Anchal AKA NFSAST (ATL,GA)
8-31-09 9:55AM

[Sushi_x]

megan drift spec
it sounds pretty good now that i went through and tightened everything and moved its place on the rubber hangars

[NFSAST]

Awesome!

As what installation instructions says check the fitment every now and than. I check my catback every oil change,since I do my own oil changes I might as well take a look! Well I'm glade to help out my Sciko family anytime!

From:Anchal aka NFSAST (ATL,GA) 9-6-09 9:54PM