Scion xB Cat Back Recomendations

[glowbox]

Anyone have a Cat Back setup that they like and would recomend? Especially like a Magna Flow one?

[vettereddie]

Custom will most likely be cheaper. Find a local exhaust shop and talk to them. Personally, I'm running a 2 1/4" cat-back with a Flowmaster Hushpower II 18" muffler in the stock resonator location and nothing at the tip. I had to do this because with mods I can't fit a muffler behind the rear wheel. It does drone in the cabin around 45-55 mph but there is no rasp. A silencer takes care of the drone.

I've talked to the guys from Magnaflow, they have the same droning issue. It is a loud exhaust. Borla also makes one, and it's the only dual-pipe out there. You will need to cut the rear bumper lip to fit it though.

http://www.borla.com/applications/lookup.aspx/2006/Scion/xB/Stainless_Steel_Cat-Back_System/140092/

[xbgod]

Here he my suggestion, I run a Magnaflow 2 1/2" high flow cat. With a Aeroturbine resonator and a Skunk2 can 7 1/2" dia. I had all stainless 2 1/2" pipe ran through out the car and custom brackets made to hold it all and still use the stock bumper. My XB makes a nice low tone. It's also a turbo car. But the sound it makes is bad ass. I've r&d everything from Apexi, Greddy, Blitz and this is by far as unique as it gets. Good luck

[vettereddie]

Yeah, 2 1/2" may be a bit large for N/A though. there is such a thing as too little back pressure, which is why I stuck with 2 1/4" up from the stock 1 3/4".

[LAKAY]

Sorry to inform you ...BUT... TSUDO makes an AWESOME "FIREBALL CATBACK DUAL" system... SWEET SOUND