Scion Wheel guide

[FrankenScion]

Found this on ProStreetOnline:

WHEEL FITMENT INFORMATION
It is assumed that these figures will work on both the xA and the xB, but most are from xB owner's personal comments.

WHEEL SIZE . . OFFSET RANGE . . TIRE SIZES . . . COMMENTS

19x8.0 . . . . . . . 35 (Front)25(Rear)215/35/19 . . . . Rubs Slightly XB(shim kit)DenZinz
19x8.0 . . . . . . . 40 . . . . . . . . . . . . . 215/35-19 . . . . Rubs under hard cornering
19x7.5 . . . . . . . 45 . . . . . . . . . . . . . 215/35-19 . . . . Rear needs 5mm spacer: DGTLLVR
19x7.5 . . . . . . . 42 . . . . . . . . . . . . . 215/35-19 . . . . No rubbing, rear mud flap trimmed: gregp909
19x7.0 . . . . . . . 42 . . . . . . . . . . . . . 215/35-19 . . . . Rolled fenders & hammered wheelwell: matchbox

18x7.0 . . . . . . . 28-32 . . . . . . . . . . 215/35-18 . . . .foxSCION "no rubbing"
18x7.0 . . . . . . . 40 . . . . . . . . . . . . . 235/35-18 . . . .K4kas no rubbing xB
18x7.5 . . . . . . . 35 . . . . . . . . . . . . . 215/35-18 . . . .Front tire rubs at full lock
18x7.5 . . . . . . . 35-42 . . . . . . . . . . 215/35-18 . . . .Silkywilson et42
18x7.5 . . . . . . . 42(Front)(35)Rear 225/35-18 . . . .Oneslowxa 2"drop tanabe sustec pro
18x8.0 . . . . . . . 28 . . . . . . . . . . . . . 225/35-18
18x8.5 . . . . . . . 28 . . . . . . . . . . . . . 225/35-18
18x9.0 . . . . . . . 31 . . . . . . . . . . . . . 225/40-18 . . . .rampagesd

17X7.0 . . . . . . . 20 . . . . . . . . . . . . . 205/40-17 . . . .quadoptix xB
17x7.0 . . . . . . . 28-42 . . . . . . . . . . 205/40-17
17x7.0 . . . . . . . 40 . . . . . . . . . . . . . 215/40-17 . . . . .TheScionicMan
17x7.0 . . . . . . . 38 . . . . . . . . . . . . . 215/45-17 . . . . xB stock
17x7.5 . . . . . . . 30-40 . . . . . . . . . . 215/40-17 . . . .
17x7.5 . . . . . . . 40 . . . . . . . . . . . . . 215/40-17 . . . .3mm Spacers CBSIMONSEZ xB
17x7.5 . . . . . . . 38 . . . . . . . . . . . . . 215/40-17 . . . .Stock xA Leinad
17x8.5 . . . . . . . 16 . . . . . . . . . . . . . 215/40-17 . . . . Front doesn't rub: Oper8r
17x9.0 . . . . . . . 17 . . . . . . . . . . . . . 215/40-17 . . . . Rear rollled fenders: Oper8r

16x7.0 . . . . . . . 33 . . . . . . . . . . . . . 205/55-16 . . . . Front rubs slightly in front: oj411
16x7.0 . . . . . . . . . . . . . . . . . . . . 205/55-16 . . . . No rubs: The Zeeness
16X7.0 . . . . . . . 35 . . . . . . . . . . . . . 205/45-16 . . . . Stock xB: Pushytop
16x7.0 . . . . . . . 25-35 . . . . . . . . . . 205/40-16
16x7.5 . . . . . . . 38-40 . . . . . . . . . . 215/40-16


15x6.5 . . . . . . 35 . . . . . . . . . . . . . 185/60R15 or 185/65R15 (xB and bB stock sizes)
15x7.0 . . . . . . 38 . . . . . . . . . . . . . 185/60-15 . . . . Stock Size xB
15x8.0 . . . . . . 18(Rear)23(Front) 205/60/15 2" ground control Minsk99 xB

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
MISC INFORMATION

Scion xA and Scion xB Specifications:

Bolt Pattern
4x100

Center Bore
54.1mm

Nut Size
M12x1.5


Stock Wheels/Tires
15"x6" +38 offset / 185/60R15 xB 185/60R15 xA 185/65R15 bB
37 lbs per wheel & tire
Alloy wheel: 16.7 lbs

Other Vehicles With Interchangable Wheels
Toyota Celica (1988-1989)
Toyota Corolla (1988-2001)
Toyota Corolla Wagon (1988-1996)
Toyota Echo
Toyota MR2 (1986-1990)
Toyota Paseo
Toyota Tercel (1989-1998)
Toyota MR2 Spyder (2000-)

Scion tC Specifications:

Bolt Pattern
5x100

Center Bore
54.1mm

Nut Size
M12x1.5

Stock Wheels/Tires
17"x7.0" +45 offset / 215/45-17

[Stryker Trailwood]

hey while I still have my omnipotent mod powers i edited your post to get rid of the 8) that was over by the tercel year dates. :up:

this is what you had: Toyota Tercel (1989-1998)

[FrankenScion]

Ah, thanks!

[Stryker Trailwood]

another size that fits the tC is 18"x7.5" +40mm Offset 225/40-18
i know that fits.

and these are supposed to fit, but not sure. (some should but i dont know definitively)

17x7.5 +40mm 215/45-17
17x8 +45mm 215/45-17
18x7 +40mm 225/40-18
18x7.5 +40mm 225/40-18
18x8 +40mm 225/40-18
19x7.5 +48mm 215/35-19
19x8.5 +50mm 215/35-19
20x7.5 +42mm 225/30-20

[highoffchlorine]

which ones are you positive and which aren't you sure on?

[Stryker Trailwood]

im only positive on the 18"x7.5" +40mm Offset 225/40-18
cause thats what i am using.

[Krdshrk]

EddNog's Wheel/Tire chart (tC):
http://www.ngtechnik.com/Scion-tC/Wheel-and-Tire-Chart.jpg

[Stryker Trailwood]

and there you go.

[highoffchlorine]

thank you

[jester4666]

Toyota Celica (1988-1989)
Toyota Corolla (1988-2001)
Toyota Corolla Wagon (1988-1996)
Toyota Echo
Toyota MR2 (1986-1990)
Toyota Paseo
Toyota Tercel (1989-1998)
Toyota MR2 Spyder (2000-)


any other 4x100 wheels besides toyota wheels work? i'm a junkyard scavenger & i love to make my vehicles unique.


edit* just was checking online & most of those wheels that are interchangable are 13 or 14 inch, not 15 inch.

[jester4666]

i've gotten together a list, though i'm sure it's not complete, of "stock" wheels that will fit the xB/xA if anyone is interested. the CB is not always the 54.1, it is larger on some, but i think there are adapters that can be used.

here's the list (Ford, Mercury, Mazda & Toyota are the best fits):

ACURA:
INTEGRA 86-01 14 X 6 4X100 12mmX1.5 56.1 H

AUDI:
4000 79-84 14 X 6 4X100 12mmX1.5b 57.1 H
4000S 76-84 13 X 5.5 4X100 12mmX1.5b 57.1 H
COUPE 79-84 14 X 6 4X100 12mmX1.5b 57.1 H
FOX 76-84 13 X 5.5 4X100 12mmX1.5b 57.1 H
80,90 QUATTRO To '87 13 X 5.5 4X100 12mmX1.5b 57.1 H

BMW:
318,325 84-91 14 X 6 4X100 12mmX1.5b 57.1 M
320,323 79-83 13 X 5.5 4X100 12mmX1.5b 72.56 M

CHEVROLET:
CHEVETTE 75-86 13 X 5 4X100 12mmX1.5 57.1 H
NOVA/SPECTRUM 86-89 13 X 5.5 4X100 12mmX1.5 - H
PRIZM 90-on 14 X 5.5 4X100 10mmX1.25 - H

DODGE:
ARIES 81-86 13 X 5.5 4X100 12mmX1.5 57.1 H
CHARGER 2.2 82-86 13 X 5.5 4X100 12mmX1.5 57.1 H
COLT 93-94 13 X 4.5 4X100 12mmX1.5 57.1 H
DAYTONA 82-84 14 X 6 4X100 12mmX1.5 57.1 H
NEON 94-96 14 X 5.5 4X100 12mmX1.5 57.1 H
CARAVAN 84-85 14 X 6 4X100 12mmX1.5 57.1 H
RAMPAGE 78-85 14 X 6 4X100 12mmX1.5 - H

FORD:
ASPIRE 94-on 13 X 4.5 4X100 12mmX1.5 54.1 H
ESCORT LX, WAGON 91-94 13 X 5.5 4X100 12mmX1.5 54.1 H
ESCORT GT 91-96 15 X 6 4X100 12mmX1.5 54.1 H
ESCORT LX 92-97 14 X 5 4X100 12mmX1.5 54.1 H
ZX2 97- 15X6 4X100 12mmX1.5 54.1 H

HONDA:
ACCORD 82-89 13 X 5 4X100 12mmX1.5 56.1 H
CIVIC 80-96 13 X 5 4X100 12mmX1.5 56.1 H
CIVIC, EX 89-on 14 X 5 4X100 12mmX1.5 56.1 H
CRX SI 86-91 14 X 6 4X100 12mmX1.5 56.1 H
CRX,PRELUDE 80-91 13 X 5.5 4X100 12mmX1.5 56.1 H
DEL SOL, V-TECH 92-on 14 X 6 4X100 12mmX1.5 56.1 H
DEL SOL 93-97 13 X 4.5 4X100 12mmX1.5 56.1 H
INSIGHT 01-on - 4X100 12mmX1.5 56.1 H
PRELUDE SI 86-91 14 X 6 4X100 12mmX1.5 56.1 H

ISUZU:
I-MARK 83-89 13 X 5 4X100 12mmX1.5 - H
I-MARK TURBO 87-89 14 X 6 4X100 12mmX1.5 60.1 H
IMPULSE 83-92 14 X 6 4X100 12mmX1.5 60.1 H
STYLUS 91-on 14 X 6 4X100 12mmX1.5 60.1 H

MAZDA:
MIATA, MX5 (Use Acorn Lug Nuts) 90-on 14 X 6 4X100 12mmX1.5 54.1 H
MX-3 92-96 14 X 6 4X100 12mmX1.5 54.1 H
MX-3 GS 92-96 15 X 6 4X100 12mmX1.5 54.1 H
PROTEGE 90-01 13 X 5.5 4X100 12mmX1.5 54.1 H
323 9 90-94 13 X 5.5 4X100 12mmX1.5 54.1 H

MERCURY:
TOPAZ 91-96 13 X 5 4X100 12mmX1.5 54.1 H
TRACER 91-96 14 X 5 4X100 12mmX1.5 54.1 H

MITSUBISHI:
MIRAGE 93-96 13 X 4.5 4X100 12mmX1.5 56.1 H
MIRAGE 94-97 14 X 5.5 4X100 12mmX1.5 56.1 H
MIRAGE COUPE 97-on 14 X 5.5 4X100 12mmX1.5 56.1 H

NISSAN:
NX 2000 91-93 14 X 6 4X100 12mmX1.25 59.1 H
PULSAR SE 87-90 14 X 6 4X100 12mmX1.25 59.1 H
PULSAR XE 87-90 13 X 5.5 4X100 12mmX1.25 59.1 H
SENTRA 87-on 14 X 6 4X100 12mmX1.25 59.1 H
200SX 95-97 13 X 5 4X100 12mmX1.25 59.1 H
200SX 95-97 14 X 5.5 4X100 12mmX1.25 59.1 H
200SX SE-R 95-97 15 X 5.5 4X100 12mmX1.25 59.1 H

PLYMOUTH:
HORIZON,OMNI 79-90 13 X 5 4X100 12mmX1.5 57.1 H
RELIANT 81-85 13 X 5 4X100 12mmX1.5 57.1 H
VOYAGER 81-85 13 X 5.5 4X100 12mmX1.5 57.1 H

PONTIAC:
LE MANS 88-93 13 X 5.5 4X100 12mmX1.5 57.1 H

SATURN:
S SERIES 91-on 14 X 6 4X100 12mmX1.5 57.1 H

SUZUKI:
ESTEEM 95-97 13 X 5.5 4X100 12mmX1.25 - H

TOYOTA:
CELICA 86-91 13 X 5.5 4X100 12mmX1.5 54.1 H
COROLLA 88-96 13 X 5 4X100 12mmX1.5 54.1 H
COROLLA 88-97 14 X 5.5 4X100 12mmX1.5 54.1 H
ECHO 00-on 13 X 4.5 4X100 12mmX1.5 54.1 H
MR-2 85-89 14 X 6 4X100 12mmX1.5 54.1 H
MR-2 SPYDER 00-on - 4X100 12mmX1.5 54.1 H
PASEO 92-96 14 X 5.5 4X100 12mmX1.5 54.1 H
PRIUS 01-on 4X100 12mmX1.5 54.1 H
TERCEL 83-97 13 X 4.5 4X100 12mmX1.5 54.1 H

[jester4666]

ok, as found out today by me, the SATURN: S SERIES 91-on wheels have a clearace issue with the front brake calipers. a spacer is needed.

[onemat]

For the 2006 xB, which is stock the 15 x 6.5 or the 15 x 7?

Thanks,

Matt

[Krdshrk]

15x7

[cecil]

am thinking bout getting 18" for my tc. what do i need to kow b4 i buy rims

[dj short-e]

anybody know if 18x8.0 will fit on a Tc wrapped with a 215/40/18? (thats the size i got from carsponsorships.com)

Also, lowered on S-techs 2.5" front & 2.0" rear

you think i'll need to roll the fenders or anything?

[JylBish]

That should fit okay. It will be close though.

[Nebster]

anybody know if 18x8.0 will fit on a Tc wrapped with a 215/40/18? (thats the size i got from carsponsorships.com)

Also, lowered on S-techs 2.5" front & 2.0" rear

you think i'll need to roll the fenders or anything?

u'll be fine.

i'm 19x9 with 245/35/19

[dj short-e]

u'll be fine.

i'm 19x9 with 245/35/19

you know what offset i might need?

(here are the wheels by the way)
http://i158.photobucket.com/albums/t82/audioguy1/decade2.jpg

[_Keith_]

If your gonna run the 19x9 with the 120 lip id say a 40 - 42 would be good...

I was running the reverb 18x8.5 with a 30 or 32 offset.

[dj short-e]

If your gonna run the 19x9 with the 120 lip id say a 40 - 42 would be good...

I was running the reverb 18x8.5 with a 30 or 32 offset.

im lookin' at 18x8.0 on 215/40/18 tires...

[_Keith_]

im lookin' at 18x8.0 on 215/40/18 tires...

You should be fine...

I was running 215's on the 18x8.5 and I was slammed all the way in the front on coilovers

[dj short-e]

You should be fine...

I was running 215's on the 18x8.5 and I was slammed all the way in the front on coilovers

no rubbing? and looks like the only off 5x114 lug pattern.. does that work?

[_Keith_]

no rubbing? and looks like the only off 5x114 lug pattern.. does that work?


No...

call them......

[dj short-e]

No...

call them......

alright, cool.. thanx for the help!

[_Keith_]

alright, cool.. thanx for the help!

No problem...

I use to be a distributer for them... some of the nicest guys and they actually get right back to you. Im still waiting on my new rims specs from another company... I sent off another set to double check and im waiting again... :boohoo:

[dj short-e]

No problem...

I use to be a distributer for them... some of the nicest guys and they actually get right back to you.

Kinda funny cuz i e-mailed them like a week ago and never heard anything back from them...

[_Keith_]

Kinda funny cuz i e-mailed them like a week ago and never heard anything back from them...

Call..............

[dj short-e]

Just wanted to let you know what i found out.
AXIS DECADE 18x8.0 (TC)
MAXIS LIP Front: 1 1/4" ///// Rear: 3 1/4"
Offset - Front: 40 ///// Rear: 35
http://i158.photobucket.com/albums/t82/audioguy1/decade2.jpg

[_Keith_]

you must have called........

And they will do it in a 5x100 right?

[dj short-e]

you must have called........

And they will do it in a 5x100 right?

DAMMIT.. i knew i'd forget something.. thats the only question i didnt ask.. he gave me another number to call anyways.. they dont sell them from where i called... he have me 888-288-0070.. so im gonna call them in a little bit!

STILL WOULD LIKE TO SELL MINE FIRST THOUGH!

[_Keith_]

hahahaha

[dj short-e]

hahahaha

thats not funny... i could use the money.. hmm i just RHYME'd:blink2:

[_Keith_]

thats not funny... i could use the money.. hmm i just RHYME'd:blink2:

no your not a rapper :threat:

[dj short-e]

no your not a rapper :threat:

ya, theres already enough white rappers in the word..

[road_warrior]

I am new to this tire thing, so please bare with me for stupid questions. What is the difference in the numbers? I mean, what is the difference between a 205/40/17 and a 215/40/17, or a 205/35/17? Which # is the lower profile? I believe that profile means thickness of tire?

I am trying to learn this as I go, lol. Sorry for being stupid.

[dj short-e]

I am new to this tire thing, so please bare with me for stupid questions. What is the difference in the numbers? I mean, what is the difference between a 205/40/17 and a 215/40/17, or a 205/35/17? Which # is the lower profile? I believe that profile means thickness of tire?

I am trying to learn this as I go, lol. Sorry for being stupid.

Its not a stupid question.. i asked TONS of questions before i bought my new ones.. i still have to ask questions.

[Stryker Trailwood]

width of the tire/thickness/diameter for what size rim.

[deflaytedwayz1]

the first number is width in mm. the second is the percentage of the first number for your sidewall height. the last is the rim diameter.

[anti-scikotik]

These are nice.....Wil they fit my 08 xD? Would you know, even if I install those Tanabe NF210's? I'll be ok with 17's or 18's.

[Peppy]

if your talking about the Axis wheels above then yes they would fit. The TC and the XD share the same lug pattern i do beleive the offsets are fairly close. Just depends on the wheels and tire package you choose.

[toyota_scion_tc]

Need info I plan on putting some 17*8 rims on my car with 245/40/17 tires. What is the best offset to push the wheel more towards the outer edge of the car with the least amount of rubbing thank you for any advice?

[gotDAMD]

Thats alot of tire. If you want the wheels pushed out to the fenders go with a +35 offset, stock is +42 I believe.

[Staller]

anything that fits on a tC will fit on an xD right?

[gotDAMD]

Yep they have the same bolt pattern. One of our tc's sold his wheels to another member with a xD and they fit.

[dirtyred]

i hate to ask but will a 20x8.5 with a 35 offset fit an 08 xb without any issues? thanks for any help.

[BigMikeLV]

how about an update with 2008-2009 xB wheel info?

[alfundo]

I'd like to see an update as well.

[xbaholic]

Ok I'm really thinking about getting new wheels for my 08 xB. I'm looking at rims that are 18x7.5. I was wondering what tires I should get that would fit on the xB well without rubbing too much. I'm new to the whole moding thing... :) Oh and was wondering that the "7.5" meant in 18x7.5? Sorry for stupid questions :)

[babygurl111]

Does anybody know if a 215 40 18 tire will rub on an 06 XA???



TY,

Tania
Miami VMFIC

[STARK_INDUSTRIES]

I have some J2 rims and was recommended a tire size. So I went with it.
Come to find out, the tires where to small for the rim. So the side walls of the tires are cracked and there are large bubbles threw out the tire. So now im out 750.00 dollars in new tires. I asked the company that installed the tires if they would be the right size. They said yes. Then when I told them what happened 1 week later, they said they wouldn't cover them because it would be a loss of money for them. ect ect ect.

So I need a tire size that will fit this rim size if anyone can please help me out here.

Rim size.

Front 19 x 8.5

Rear 19 x 9.5



http://i108.photobucket.com/albums/n25/tehachapi_2006/scionshow003.jpg

[PUPULE ONE]

I have a 2005 xb lowered and my tires rub when turning i cut out the fender wells and i still rub... And the xa and the xb are pretty much the same in the wheel and tire dept

[PUPULE ONE]

If you get falkins they dont rub, but yokohama's rub even if you cut out the fender wells my tires are 215-40-18... You can try 215-35-18 but the tires only last about 6 months


ok i'm really thinking about getting new wheels for my 08 xb. I'm looking at rims that are 18x7.5. I was wondering what tires i should get that would fit on the xb well without rubbing too much. I'm new to the whole moding thing... :) oh and was wondering that the "7.5" meant in 18x7.5? Sorry for stupid questions :)

[Sundown]

I'm looking at some 18x8 for my tC, the only come in 35 and 50 off set, will either of those work?

[icanhascheezburger?]

EddNog's Wheel/Tire chart (tC):
http://www.ngtechnik.com/Scion-tC/Wheel-and-Tire-Chart.jpg
so ive been looking at that chart and I might purchase a pair of 19'' volks from a friend and they are set with a 235/35/19 tire and on the chat its in dark red signifying a greater than two percent error. But can anyone possibly predict for me what that error would be? the rim specs are 19x8 with a 43 offset

[TAMPADADDY]

DODGE:

NEON 94-96 14 X 5.5 4X100 12mmX1.5 57.1 H


just an FYI only the 94 neon is a 4x100 and there are very few of those around
95-05 are 5x100

[The5ickne55]

What is flush fitment for an xD?

I am thinking around 17x9+30?

[DeadCannon]

so ive been looking at that chart and I might purchase a pair of 19'' volks from a friend and they are set with a 235/35/19 tire and on the chat its in dark red signifying a greater than two percent error. But can anyone possibly predict for me what that error would be? the rim specs are 19x8 with a 43 offset
Speedometer. Since the wheel is larger than stock size it actually turns less RPMs at the same speed so the ECU thinks you are going slower than you actually are

[sosborne]

i have 17x7 +48 wheels on my tc and im looking to get wheel spacers. is there a way i should figure out what size i need. im on tein stechs so they cant go out too far. thanks

[Bullwhip]

Anyone see a problem with running 18x8 +33 offset on an xB2?

What would the best tire size be? I was thinking 215/45-18 or 215/35-18....

[DeadCannon]

I've got 225/40 on my 8" wide rims. 215 should be ok, but they will have some stretch. I'd go with either 40 or 45 to give the rim some cushion.

[Bullwhip]

I'm looking at some wheels for an xb2 and was looking for some thoughts on if I'd run into any issues with the size of them. Rims are 19x8 with a 48mm offset. Wheels are 225/35/19. I also plan on adding the TRD lowering springs later this summer. Thanks for any help.

[Toasted7]

Looking to put some wheels/tires on my xB2. Wheels are 17x7 (5 x 100/114.3) with 40mm offset and tires are 225/45/17. I plan on adding NF210s at some point in time (since this is a daily driver I just want to get rid of some gap).

Any issues I should worry about? I want to make them fit correctly/look good. Thoughts or suggestions are appreciated.

I'm still debating on black or gunmetal on a SW xB2.

[omgitsandyyo]

I have Corvette Sawblade wheels 17x9.5 all around with 37mm adapters will I be fine? suspension is stock but I plan on getting 2" lowering springs...http://i40.tinypic.com/2utg5e8.jpg

[Speedway6]

Another group of factory wheels to start hunting for are Volkswagen and Audi shoes. The MKIV GTI's and Jettas, as well as some of the early turn of the century audi's like the TT, all have a 5x100 bolt pattern.

[MONKEY_CHEESE]

im running some bbs rs's.

specs are :

F: 8.5 x 16 et 30
R: 9.5 x 16 et 18

dropped around 4 or 5 inches. camber in the front is -1 with camber bolts and the rears are at -5. barely any rubbing in the rear

[racerx428]

Will these specs fit a 2005 tC? And what tires size would u recommend? thanks....

Size: 18x8.5
Offset: +35mm
Bolt: 5x114.3

[DeadCannon]

Will these specs fit a 2005 tC? And what tires size would u recommend? thanks....

Size: 18x8.5
Offset: +35mm
Bolt: 5x114.3

You'd have to run an adaptor. tC bolt pattern is 5x100. This would also lower the effective offset depending on the size of the adaptor. Hella Flush status.

[Tonkatoy02]

I got a set of 14" BMW "bottle cap" wheels. They are 7" wide. I want to run a stretch. What tire size should i go with. I was thinking a 165/65/14. Thanks. -mike-

[MONKEY_CHEESE]

That won't be hardly any stretch at all.

[DeadCannon]

tC stock rims are 7.5" with 215/40 tires for reference. 165s should be a load of stretch. Do those rims have a good shoulder on the lip to get a good bite?

[MONKEY_CHEESE]

And stock tires on xBs are 185/65. A 165 won't be that much. Considering I'm running a 205/45 on a 9.5 wide wheel. When a 205 is technically rated for about a 7.5

[MONKEY_CHEESE]

A 165/65 on a 7

http://i174.photobucket.com/albums/w97/wakeboard_fool/c8e9ca3b.jpg

[Tonkatoy02]

So what size should i go with that will be low profile with a good amount of stretch. I like the way that the 165 looks, but its a little tall. Maybe just the Pic?

[DeadCannon]

Maybe less side wall? 50 series?

[MONKEY_CHEESE]

165/45 ftw.

http://i174.photobucket.com/albums/w97/wakeboard_fool/60810e96.jpg

http://i174.photobucket.com/albums/w97/wakeboard_fool/b7f5a76b.jpg

[MONKEY_CHEESE]

The only bad things about running that set up is your speedo will be way off, saying your going faster then you really are, and you odometer will say your tacking on more miles and lastly, with 14's and smaller tires, your wheel wells are going to look reslly big compared to your wheels/tires

[Tonkatoy02]

I test fitted a 165/65/14 on the wheel and threw it on the car before i start the repair and refinish on the rims, and it was little stretch, but i like the style it looks different. I think ima mount the rest of the tires on the rims and see what it looks like with all four on it. Ill post up pics on Friday.

[MONKEY_CHEESE]

sounds good.

[Tonkatoy02]

Colby what is the brand of that tire from your last post and size? And are they 7" or wider. I like that stretch. My dealer only had the size i tried on.

[Tonkatoy02]

Well here it is, kinda poor pic from my phone the lighting was wrong.

http://www.scikotics.com/forums/attachment.php?attachmentid=22031&stc=1&d=1285462976

I Like the way that they look and the offset could be a little wider, but once there red I think it will look much better. I was also thinking of taking my stock springs and cutting a couple of rings off for a lower drop than my trd's just to use with this wheel combination. It changes the whole look of the car IMO.

http://www.scikotics.com/forums/attachment.php?attachmentid=22032&stc=1&d=1285463214

[MONKEY_CHEESE]

Colby what is the brand of that tire from your last post and size? And are they 7" or wider. I like that stretch. My dealer only had the size i tried on.

Which post exactly? Lol

And sorry it took me a while to reply, I didn't see you had replied.

[Tonkatoy02]

The first pic is of the 14" wheels and the second pic is of the wheels and tires that i have on my car now. The post i with the pic of the wheels on your car and the 165/45 series tires. Whats the size of the wheel on your car and the brand of that tire? Thanks

[Jays_RS7.0]

I was wondering if this set up will work on my xb2, any thoughts ???http://binghamton.craigslist.org/pts/1985866525.html
or these .. http://binghamton.craigslist.org/pts/1941831616.html

[SPIKEnTR]

I was wondering if this set up will work on my xb2, any thoughts ???http://binghamton.craigslist.org/pts/1985866525.html
or these .. http://binghamton.craigslist.org/pts/1941831616.html
You can probably look up both those wheels on Tire Rack. Be sure to enter your B in the search. (was thinkin of you and the boys-jets/bills game)

[Jays_RS7.0]

You can probably look up both those wheels on Tire Rack. Be sure to enter your B in the search. (was thinkin of you and the boys-jets/bills game)

HAHA ... yea Andy was rubbing it it mine and Timmy's faces lol .And i think i might go a different wheel than what i posted.

[DeadCannon]

Need more info on the BBS's. I'm pretty sure last gen Camry was 5-100 and current gen is 5-114.3. xB2 is 5-114.3

[Jays_RS7.0]

Need more info on the BBS's. I'm pretty sure last gen Camry was 5-100 and current gen is 5-114.3. xB2 is 5-114.3
I think they will fit , they do have the TPS .I havent called about the offset but i think i may go with something different. I seen some nice ones on tire rack . Just a lil bit more money though.

[Jays_RS7.0]

How wide can i go without rubbing issues, is 18x8 ok ?

[silncio]

Hey Guys, I'm newbie looking to get fresh and Im rocking an RS 7.0 on 205/55/R16 and was looking to do some 245/50/R20 and i believe they are 20 x 7.5J but not sure of the bolt pattern. So I would like to know if I can ride on these 20s without rubbing and without any major issues other than prolly gas....also keep in mind RS has kit and is lower about 1.5-2 at most I believe. Thanks for the help guys, much appreciated...I'll be around all day and just hanging so Ill keep checking in for yall replies. Out.
S.

FYI: just found out bolt pattern is 5 x 114

[bryan62005]

im trying to figure out if these will fit my xb2.. it has no suspension mod right now but im doing tanabe df210 soon once they arrive
http://cgi.ebay.com/ebaymotors/FOUR-19x8-5-4-5-114-3-KONIG-AFTERBURNER-WHEELS-_W0QQcmdZViewItemQQhashZitem3a61431e92QQitemZ25073 9891858QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccesso ries

[MONKEY_CHEESE]

They will fit with no problems at all.

[LadyDana06]

what is good size for rims on 2010 tc

[DeadCannon]

17x9

[SR*77]

I found some rims I really like but the only size I seen that seems close to fitting is a 18x8 with a +14 offset and 4.989" back spacing. Will these fit on a 2nd gen xb with a 1.5" drop?

I dont really want to get into fender rolling or anything like that, I just want to keep it simple.

[DeadCannon]

Probably. Rolling fenders isn't that big a deal though.

[Slick]

I have an xb1 with the tanabe df210 springs. I am looking at getting some rota circuit 10 rims. The offset is +45. Will I need to add spacers?

[lowlow]

Well thats all up to u dood since the offset is so hight and probably not as wide wheel i think i would add alil 10mm in the rear

[Slick]

Thanks man. By adding spacers, would I need to go with extended studs?

[lowlow]

Nah u should be good

[Slick]

Sweet! Thanks dude.

[Slick]

Is there a way to tell the offset from looking at the rim or taking measurements?

[lowlow]

It should say it inside the rim