underbody kit 12v power source

[MrHat]

Im really new to the whole car modifications, I installed all my underbody neon kit but I need a 12 volt power source. any help? I know Nothing.

[PhattC]

Im really new to the whole car modifications, I installed all my underbody neon kit but I need a 12 volt power source. any help? I know Nothing.

Yes, 12v to ground that is it..... Not the battery ground to metal ground....

[Silvertoast]

i tapped into my brakelight fuse. since the brake lights will work with the ingnition off( it was just an easy find) if you want them to cut off when you turn the key off, use your cig lighter or radio fuse.

[_Keith_]

Im really new to the whole car modifications, I installed all my underbody neon kit but I need a 12 volt power source. any help? I know Nothing.


The battery... just put a fuse in it... I know the oznium underbodys come with fuses already

[$cionizer]

just hook it to a bolt thats screved to metal and u should be set..

[$cionizer]

just use a voltimeter...that will helpu find a source and the ground

[Tony Russo]

the battery tie down bolt works just fine you just have to take it off and sand the paint off the bottom of it and screw it back doen on top of ur ground wire.

[_Keith_]

the battery tie down bolt works just fine you just have to take it off and sand the paint off the bottom of it and screw it back doen on top of ur ground wire.

That is not a proper ground... that is a removeable piece...

[triniosito]

The battery... just put a fuse in it...
+ 1

[$cionizer]

That is not a proper ground... that is a removeable piece...

true in truns u might get a bad grounnd and they could short...blow fuse anyways if u are at the battery tie down...y not just use the the ground from the battery.......:doh:

[08_xbeezy]

The battery... just put a fuse in it... I know the oznium underbodys come with fuses already

this would be the simplest and most effective way to go!