Overbore Valve?

[08falcon_tC]

Any info? I found some on dezod.com but not quite sure of what the purpose is. Maybe higher flow intake/exhaust? Im looking to build the engine a bit to prepare for the turbo, didn't know if this would make a difference.

[JoshCrane1]

IF YOUR doing any headwork, it would be highly recommended, since your going to be in there anyway. peeps usually do it with a port and polish; some consider it a stage2 port and polish. larger valves will give you better flow in and out of your cylinder which = more power potential.

like you breathing with a coffee straw and a then a soft drink straw, to move the equivalent air with both, the soft drink straw will require less energy, therefor leaving more energy to do other things, and in this case make more power with the same peripheral parts.

flow=go!!


hope that helps.

[08falcon_tC]

awesome, I had some idea of what it did but wasnt 100 percent sure.