Water Temp sensor Adaptor

[Showsol2211]

Hey guys,

I need your help! I am about to install my ProSport premium gauges in my tC. I have a water temp and a oil pressure. I need to know what size the upper radiator is so that i can order the water temp sensor adaptor.

Here is the site with the izes available:
http://prosportgauges.com/water-temp-sender-radiator-hose-adaptor.aspx

Thanks in advance!

Ryan

[Showsol2211]

no one knows?

[Go4shoped]

not 100% sure but i just took my caliper out there and measured the radiator inlet barb and got 36mm

[Showsol2211]

not 100% sure but i just took my caliper out there and measured the radiator inlet barb and got 36mm

So it was 36mm for the inner diameter?

If so, i owe you huge!

[Go4shoped]

yea its somewhere around 36-38mm I.D. The only way to really be 100% sure is to take off the hose, and i just dont feel like refilling my coolant and purging the system today.

[Showsol2211]

I've been trying to call the local toyota dealers, but none of them have it in stock and it doens't show sizes in the computer. :(

[Showsol2211]

Here is what they have on the ProSport (http://prosportgauges.com/water-temp-sender-radiator-hose-adaptor.aspx) site.

Inches to milimeters conversion chart:
28 Millimeters = 1 1/32" (most Honda's)
30 Millimeters = 1 1/16"
32 Millimeters = 1 1/4" (Celica)
34 Millimeters = 1 3/8" (Supra, Chevy's & Cobalt SS)
38 Millimeters = 1.5" (Subaru, Hyundai & RX-7)
If you measure the outside diameter of the hose subtract 6mm for the wall thickness

[Go4shoped]

The outsie diameter is 44mm. So if thats site is right its 38mm.

[Showsol2211]

Easy enough, thank you sir!

[Silvertoast]

hate to thread jack, but does anyone know bout the size of the 1st gen xB?

[Silvertoast]

sorry just realized this was posted in the tc section, seen it in new post. my bad:roll:

[Showsol2211]

god i remember seeing this somewhere too... Search on ScionLife and on here.. I know that someone had it posted.