high temp paint

[toasterlovin976]

im looking for some bright green, i mean BRIGHT green high temp paint for brake calipers and possibly engine stuff, if you have seen the inside of my car you know what color green im talking about, well here....
http://i195.photobucket.com/albums/z118/roni976/100_2216.jpg
the rims im getting are the sportmax 961 with the paintable ring which will also be the bright monster green, ao any ideas.......................

[trinben]

damn that almost looks photoshopped :lol:

you're probably not going to find anything that color at pepboys or autozone...you may want to try an automotive paint store and see they can mix you some high heat paint.good luck :up:

[toasterlovin976]

well the color of the interior pieces is actually sprayed yellow greenish then sprayed with fluoresent green, so just a lime green or something not grabber green will work. yeah i guess they do look photoshopped i guess i have a good airbrush artist
www.rockstargraphix.8k.com

[toasterlovin976]

YAHTZEE>............................................
http://www.tirerack.com/brakes/g2/caliper_paint.jsp?s_kwcid=brake%20caliper%20paint| 928311553&make=G2&

[aalbertson3]

Looks like regular green......... :ponder:

[TastyTuner]

try grabber green. i got it at autozone. it may be close to what you are looking for

[dabadestxb]

whats up man how did you get the pieces around the steering wheel off and on the shift knob,thanks

[_Keith_]

whats up man how did you get the pieces around the steering wheel off and on the shift knob,thanks

Disconnect the battery...

On the steering wheel theres 2 bolts I believe that hold the bag in... one on each side... unscrew those... pull the bag out unplug it... then unscrew teh screws holding the plastic pieces in.

[SHABBY3]

What about the shifter? Do I need to disconnect the battery, then just remove the two screws and that's it? Can I some how put it back together to drive while I'm waiting for the paint to dry?

[Kenrock1000]

DOOOD...I so am going to copy you on that color accent on the interior!!!

That looks KILLER!!!! Im totally on a green rampage right now too! haha:qright3:

[toasterlovin976]

good luck trying to copy it i have a guy custom airbrush it, its a green to yellow linear fade, he has a lot of time in all my pieces and will be doing my switch plates for all the doors and my engine valve cover. you really have to see them in person to see the color good.oh and the shifter piece, i just used a flat head screw driver and popped it out, i think it has 2 tabs maybe one i dont know it just popped out and popped back in.

[Kenrock1000]

Yea, I really like that color. I bought a can of paint but I found something else I think will work really good. Check out this vinyl kit (http://www.rvinyl.com/dashkits/scion/xb_2004.htm)I found for $25...

[toasterlovin976]

yeah ive been to that site before, but they dont have anything thats even close to mine, they have good stuff though. i can have my painter do yours if you want.

[Kenrock1000]

I do like that color, but I think Im going to go with the vinyl kit...the color isnt the same, but its a green I like.

[toasterlovin976]

well there you go if you like it go with it, are you going to the asylum if so ill be there and you can see it in person,just look for the MONSTER emblem

[ShadowBox]

Disconnect the battery...

On the steering wheel theres 2 bolts I believe that hold the bag in... one on each side... unscrew those... pull the bag out unplug it... then unscrew teh screws holding the plastic pieces in.
Not necessary to unplug the bag, just lay a towel on top of the steering column and set the bag on the towel. I hate unplugging anything associated with the airbag so always try to avoid it.

Also, the two bolts that hold the airbag in are torx drive, so get a set of torx screwdrivers or a torx bit set.

[dabadestxb]

thanks man

[crackinabox]

the bottom shifter ring is held in by plastic tabs. i would remove the center console to help keep from braking them....the piece for o/d just pops out with a flat head screw driver and some tlc. there will be a zip tie holding a wire that you need cut off then it will come right off.

[HomEr]

as far as the high temp paint, just spray or brush on a high temp clear or white paint....then add your green