mocking up my scion for vinyl

[87rx7chick]

i used duplicolor "shield" spray on removable bra, it protects from rocks and chips and what ever can hit your car on a long trip. its only temporary. so i thought it would be great to use this to try and mock up my vinyl idea. its cold out so i only got to do this bit
http://i23.photobucket.com/albums/b399/87rx7chick/xb%20re-painted/IMG00013.jpg
http://i23.photobucket.com/albums/b399/87rx7chick/xb%20re-painted/IMG00012.jpg
http://i23.photobucket.com/albums/b399/87rx7chick/finalvynil.jpg
http://i23.photobucket.com/albums/b399/87rx7chick/finalside.jpg

[Eros]

I think it looks better in the third pic where you have the edges of the top portion going to the headlights. The way you have it now looks a little out of place. If you aren't edging to the headlights I would suggest continueing the black up over the hood. That would look sweet IMO.

[87rx7chick]

I think it looks better in the third pic where you have the edges of the top portion going to the headlights. The way you have it now looks a little out of place. If you aren't edging to the headlights I would suggest continueing the black up over the hood. That would look sweet IMO.

ya. there are actualy headlight eyelids too if i do it in vynil

[87rx7chick]

140 views and 1 comment? :thx:

[triniosito]

:up: :up: :up:

[ShadowBox]

I dig it

[Madode]

Looks really nice. It appears (could be my old age and bad eyesight) that you're carrying the vinyl along the roof, but only on the very side and then straight back to the wing. I think that's a nice touch. I also like the simple sharp edge design along the front and sides.

Two parts that don't seem "right" to me (personal opinion here) are:

1) Front: From Middle to Headlights: Everything else on the front is straight, but where the black rises up from the middle and "rolls" over to the eyelids. Is that by design?

2) Side: Back Side of Rear Door: Same as above, everything else in the design on the side is straight with sharp edges and lines, except for where the door panel flows up along the wheel well piece. It seems like an out of place piece to me.

Again, these are just personal opinions. Otherwise, I like the overall design.

[dirtyred]

http://i48.photobucket.com/albums/f224/dirtyred98/vinyl_belongs_on_your_house_96dpi.jpg

[87rx7chick]

Looks really nice. It appears (could be my old age and bad eyesight) that you're carrying the vinyl along the roof, but only on the very side and then straight back to the wing. I think that's a nice touch. I also like the simple sharp edge design along the front and sides.

Two parts that don't seem "right" to me (personal opinion here) are:

1) Front: From Middle to Headlights: Everything else on the front is straight, but where the black rises up from the middle and "rolls" over to the eyelids. Is that by design?

2) Side: Back Side of Rear Door: Same as above, everything else in the design on the side is straight with sharp edges and lines, except for where the door panel flows up along the wheel well piece. It seems like an out of place piece to me.

Again, these are just personal opinions. Otherwise, I like the overall design.
hmmmmmmmmm. yeah i see where your coming from. i'll try the part over the wheel well a differetn way. as far as the front on the hood. not sure exactly how to end that just yet...

http://i48.photobucket.com/albums/f224/dirtyred98/vinyl_belongs_on_your_house_96dpi.jpg
ok. how bout i paint it? vynil will only be temporary. i seem to get tired of things VERY quick... instead of RUINING my stock look with paint. i thought i'd rock some vynil for a year or so... would that make you happy? if i painted it?
ooo i should go to macco!!!!!!

[dirtyred]

you know, theres no reason to get pissy over my comment just because its not what you wanted to hear. you wanted a response. you got a response. :razz:

[low_wgn]

i like it...looks pretty good

[enufced904]

Yes it looks pretty good... how long before the vinyl comes in?

[HyPnOtIk]

Im not a big fan of the hood ones but everything else should look good :D