this wheel/tyre config will work without rubbing?

[wr332]

i have a 225/40R18 92H falken NS-2 Ultra Sport setup lefted from 2004 toyota corolla s , i think is it 5x100

will it fit without any problems?

the stock tyre are 195/60R16

ps. how to change tyre without the tyre monitor system getting error ?

[bobolinko]

You'll have to dismount the rubber and TPMS sensors of your stock setup, install the TPMS sensors on your new rims, and then re-mount the tires to the wheel and take it from there.

This is, of course, assuming that those sensors will be able to mount to the new rims. (Mine did, but I have a different mfg of the wheels)

If they can't be remounted on the new setup, the only problem you'll have is that the stupid (_!_) indicator will not go off and it won't affect anything at all. The circut is active and no simple fuse removal will deactvate the indicator. :(

[wr332]

just wanted to know if 225/40R18 92H setup work or not,,

it won't mind the (_!_)

[bobolinko]

What is the offset of your new rims ?

[wr332]

ok i turn the wheels over i found these marks

18X7.51
305
pcd:
et

don't know what they mean,,, i have stock everything with falken Ultra sport NS-2 tyre 225/40R18 92H

[um_lunchbox]

ok i turn the wheels over i found these marks

18X7.51
305
pcd:
et

don't know what they mean,,, i have stock everything with falken Ultra sport NS-2 tyre 225/40R18 92H



OK the 18 x 7.5 is the size and width of the rim

I have no idea what the 305 means ... you will need to find out what the offset of the rim is in order to determine if they will fit. Or simply mount one tire and rim on the front and hope for the best.

Size doesn't matter ..lol much, the xD will accept 19" rims easily with the proper offset, thats the game changer ...

[wr332]

well i just found out it's ET 35

[gotDAMD]

Your good then. I run the same set up