APT Fog help

[Rolton]

Hey guys,
I've been searching for the answers for this for a while. But i can't figure out where the switch hooks up to the harnesses under the dash. I connected it to the harness just hanging, but don't know which one on the panel to connect it to, or how to get those stupid plastic covers off (didn't want to pry to hard in fear of breaking something)
Any help would be greatly appreciated

Dave

[SpeedRacer]

As far as how to get the plastic parts off. You take the fuse cover off that is below the switch panel and push the switch panel out from the back, that is what I did. Then the switch hole cover pieces you do the same. Just push on them from the back and they pop right out.

When it comes to wiring, I wired mine into the parking lights so that they come on with the parking lights. I don't know if that is what you want to do or not. But there are also connector points on that fuse panel where you can connect the lights up to also and you control when you want them on. I am at work right now and don't have either link with the pictures on how to do it. I can post the links when I get home. If this helps you out any.

[DeadCannon]

Mine plugged into the factory wireing harness so they act like the stock fogs. On with the main headlights and off with the high beams.