08 XD Dual Exhaust Setup

[bobolinko]

Does NE1 have an 08 XD with a dual exhaust setup?

I'd like some pointers if anyone has knowledge on this.

Thanks ahead of time !
Aloha . . . .

[greenguy101]

I don't know if one is even available. The Razzi kit has holes cut for dual exhaust but they sell a non functional exhaust tip for the left side. I'm sure a good shop could fab something though.

[DeadCannon]

Y-pipe and a couple dual tip DTM style mufflers :up:

[XD2O]

It would have to be a custom job, the big issue would be clearances, you just have to see where things would fit... but yes, Y pipe splitting to two mufflers would give you the look.

[CXTKRS1]

Modify stock bumper or go aftermarket, transverse mounted muffler along with tips and you should be done.

[CXTKRS1]

BTW I say avoid the Y-Pipe setup just for ground clearance issues.

[bobolinko]

Thanks for responses guyz!

I'm going to have a look at a shop to help me hook up m 2 Magnaflows to the system
Gabe from Precision Muffler helped me with the y's and butterflys, etc. so I'm almost ready to make the cutouts on the rear bumper to accommodate the 2nd muffler tip.

[XD2O]

Pics! On the lift, off the lift, sound clip... Pose in a couple yourself... ;)

[DeadCannon]

Aww, no quad tips?

VIP Fit
http://i309.photobucket.com/albums/kk363/inamoto_01/gd14_fit_r.jpg

[Resolve]

Due to room restrictions and all underneath I would go with single muffler that has single inlet dual outlet. then just run piping.

[Resolve]

such as (pic for example only)

http://www.cherrybomb.com/cbimages/products/mufflers/7471.gif

[bobolinko]

Pics! On the lift, off the lift, sound clip... Pose in a couple yourself... ;)

Sorry, the owner of the muffler shop got into trouble with a customer getting hurt, so no-can-do with the pictures on the lift. I have the 2 Magnaflows active now, but on tuesday I have an appointment to install the butterfly valve to cut out the L O U D bad boy, and have only the quiet one running (for late night homecomings) and will take some shots of what is the "new look" The low end already has a noticeable difference, and the 3.5K - 6K rev range is obviously better too. Gas mileage went up a couple of ticks, (even with WOT happy moments) LOL. I'll post the shots as soon as all's done and I can shoot shoot them.

One HAPPY Camper !
BTW,
Midas wanted 350 to do the job. 150 to hang and 200 to connect pipes. They wanted 1 whole day with car there. (not too thrilled with that idea)

Exhaust Systems Hawaii... $58 to hang 180 to connect pipes AND butterfly valve. Hung and connected pipes in 1.5 hours. They even painted all the pipes, and polised the mufflers and tail pieces. Valve and flanges to mount to the piping to be put in on Tues June 1st. estimated time to do it, 1 hour. Those boys are knowldegeable and PROOOOOOFESSIONAL! Dude's name is Ronnie.

[XD2O]

If I ever have exhaust issues after driving to HI, I'll look em up! ;) Custom Exhaust shops rock!

[YELOSUB]

That's awesome, glad to see that this project actually came to a successful conclusion...Definately in for pics...For those that suggested he do just a dual tip exhaust, here are some pics of my old set-up that I ran on RS2 xB...

http://i209.photobucket.com/albums/bb107/yelosub/IMG_0592.jpg

http://i209.photobucket.com/albums/bb107/yelosub/IMG_0597.jpg

http://i209.photobucket.com/albums/bb107/yelosub/IMG_0594.jpg

[bobolinko]

Here' we go !

http://i602.photobucket.com/albums/tt107/bobolinko/XD/DualsRearView.jpg
Don't Worry, You Can't See The Sound Deadener frm the Back.
http://i602.photobucket.com/albums/tt107/bobolinko/XD/BackLeftView.jpg
Left Side Mod With Trim Installed
http://i602.photobucket.com/albums/tt107/bobolinko/XD/LeftSidewithTrimInstalled.jpg
Left New Muffler Hung and Wifie's White Yaris
http://i602.photobucket.com/albums/tt107/bobolinko/XD/LeftMuffler.jpg
Crossover to Muffler
http://i602.photobucket.com/albums/tt107/bobolinko/XD/LeftUndercarriage.jpg
Crossover Between The Two
http://i602.photobucket.com/albums/tt107/bobolinko/XD/CrossoverPipe.jpg
Right (Loud One) With The Powered Valve
http://i602.photobucket.com/albums/tt107/bobolinko/XD/RightSideAtTheValve.jpg
The Switch Location
http://i602.photobucket.com/albums/tt107/bobolinko/XD/ValveSwitchLocation.jpg
The Switch Is Softly Lit Internally (Light Green) - - :<(
http://i602.photobucket.com/albums/tt107/bobolinko/XD/TheSwitch.jpg
So There you have it... Big Investment, but I Love It! Quiet at Night, Loud (when I Want IT) And Infinitely Adjustable With That Electric Butterfly Valve From JEGS. You can hear a sound sample while idling with the attached MP3 file

[Jays_RS7.0]

Thats pretty sweet set-up man .Good job.

[KILLA XB]

Nice job

[robbiej]

Very clean, looks great.

[XD2O]

:up:

[katchkillah]

ESH did a killer job!!! that's why they been around for so long. oh the days of the Super Trappppppp. lol.

[rhino74s]

Very nice, clean and well executed! :up:

[floridaxD]

the setup looks awesome really need a sound clip

[slapstikz199]

Nice.

[scionsiam]

that is sick!!!