PDA

View Full Version : xB LED The Air Return



DriverLost
09-05-2007, 09:38 PM
Return Air Damper Switch Illumination

You need your favorite color LED, wire, solder (optional) 3/16 drill bit and drill.

Tired of not knowing where your fresh air / recirculate switch is at, in the dark?
http://i9.photobucket.com/albums/a91/Scion4Rob/Mini%20Mods/IMG_9557.jpg
First remove the center section.
http://i9.photobucket.com/albums/a91/Scion4Rob/Mini%20Mods/IMG_9560.jpg
Remove the two screws behind the outer controls, and pull it forward and out.
http://i9.photobucket.com/albums/a91/Scion4Rob/Mini%20Mods/IMG_9559.jpg
http://i9.photobucket.com/albums/a91/Scion4Rob/Mini%20Mods/IMG_9562.jpg
Remove the three quick connects in back to pull it completely out of the way.
http://i9.photobucket.com/albums/a91/Scion4Rob/Mini%20Mods/IMG_9563.jpg
Now gently depress the plastic locks
http://i9.photobucket.com/albums/a91/Scion4Rob/Mini%20Mods/IMG_9564.jpg
and pull the white damper control assembly slightly forward to expose the tap for the switch.
http://i9.photobucket.com/albums/a91/Scion4Rob/Mini%20Mods/IMG_9565.jpg
Lightly press the tab and pull it straight out.
Now a drill press is real nice, free hand people, be careful!
http://i9.photobucket.com/albums/a91/Scion4Rob/Mini%20Mods/IMG_9569.jpg
Drill a 3/16 hole through the back side. TAKE YOUR TIME!
http://i9.photobucket.com/albums/a91/Scion4Rob/Mini%20Mods/IMG_9568.jpg
Clean out the junk,
http://i9.photobucket.com/albums/a91/Scion4Rob/Mini%20Mods/IMG_9570.jpg
and either prepare to install the LED, or you can add a small hole through it to expose the light. (Purple light in my RS 4.0 view at the bottom) I like the my green install better in the RS 3.0,no through hole, more subtle.
http://i9.photobucket.com/albums/a91/Scion4Rob/Mini%20Mods/IMG_9571.jpg
Install the LED.
http://i9.photobucket.com/albums/a91/Scion4Rob/Mini%20Mods/IMG_9572.jpg
If you have the short wires, you will need to add on a little section.
http://i9.photobucket.com/albums/a91/Scion4Rob/Mini%20Mods/IMG_9574.jpg
Time to reinstall. There is a window on the lower left side Scion gave you for this mod. Say thank you Scion! :wink:
http://i9.photobucket.com/albums/a91/Scion4Rob/Mini%20Mods/IMG_9576.jpg
Carefully slide the control back in. Notice the metal tap at the bottom, line it up correct, don't force it.
http://i9.photobucket.com/albums/a91/Scion4Rob/Mini%20Mods/IMG_9577.jpg
Check your wires. Be sure you leave some slack, and that it works freely. if so snap the assembly back in. Now find the green and white wires on the large white conector.
http://i9.photobucket.com/albums/a91/Scion4Rob/Mini%20Mods/IMG_9578.jpg
Green is hot (positive) from the dimmer switch, white is ground. Carefully tap into here and tape them up so they won't short out.
guess what? Your finished! Put it all back together, and enjoy knowing if that's your feet you smell,
http://i9.photobucket.com/albums/a91/Scion4Rob/Mini%20Mods/IMG_9588.jpg
or the skunk your about to run over
http://i9.photobucket.com/albums/a91/Scion4Rob/Mini%20Mods/IMG_9587.jpg
All at a glance in you dark box.
http://i9.photobucket.com/albums/a91/Scion4Rob/Mini%20Mods/IMG_9589.jpg
http://i9.photobucket.com/albums/a91/Scion4Rob/Mini%20Mods/IMG_9591.jpg

Bud-D
10-20-2010, 12:41 AM
Again.... diggin' the pics :(

diknaBox
01-20-2011, 01:00 AM
updated pics???

Bud-D
01-20-2011, 11:21 AM
I saw in another thread that he was having problems with his photobucket account or something....

diknaBox
01-20-2011, 12:37 PM
gotcha... be cool if fixed for good reference!

JDMonster
04-11-2011, 09:31 PM
be nice if you could still see the pics

DriverLost
04-13-2011, 01:39 PM
Wow no idea what happened with these pics too :-( Sorry I'll do what I can to find them and fix this thread too! :doh:


Rob
Sent from my iPhone using Tapatalk

mmmgawa
04-22-2011, 11:51 AM
ooh yes please with the pics. I have a bunch of led's laying around I need to put somewhere. :dontknow: