Interior lighting

[xbscion10]

Ok I am sure that this question is answered somewhere on here but I can't find it. How would I go about wiring in lights for under the dash and back seat I have a switch that goes into a blank spot on the dash but I am not sure how to power and wire the crap any advice would help.

[E-Dub]

www.scionlife.com (http://www.scionlife.com) is our best friend! search there my friend, garuntee you find threads

[darthclutch]

Go to your local auto parts store and buy an "add a circuit" for about $10-12 (also commonly called a "pig tail"). Plug this into your fuse block on a circuit that best suits your needs, like ACC, and run a positive line to your switch. Run the other side of the switch to your lights, on the positive side, and then run a line off the negative side to a bolt on the body of the car to ground it. Simple!

If you haven't already figured out how you want to mount the lights, I recommend zip ties or 3M double stick tape, which can be also be found at the auto parts store or any hardware store.

[zaskar]

If your still unsure you can go to the oznium website and search under forums. There you will find wiring diagrams that are easy to follow. ( top right corner of home page.)