xb on 20" with df210 springs.anyone?need help!

[confuzedTC]

trying to put 20" on my xb with df210 springs. does anyone know what i have to do and modify for the front not to rub or tear my fender off! please need some input on this subject.....ASAP!!!!!!!

[bB2NER]

As far as I know the only place you will rub is on the front inner plastic wheel well liner. Trim it where it looks like it will rub. Also just don't hit bumps when your wheels are turned. Not sure how much drop you get from those springs? Have you put them (wheels and springs) on yet to check clearances???

[xBvegan]

here's another thread on the same topic:

http://www.scikotics.com/forums/showthread.php?t=13021

i didn't read through the whole thing to see if it answers your question but it might have some helpful info for you.

good luck with the 20's and DF210's. post up pics when you get done!!

[confuzedTC]

i already have the springs on the car .im running a 225-30-20 tire 20x7.5 rim.
they rubed a little when i had the trd springs on , but i was still trying to get that extra half inch where the fender is right "just above " the tire. ive tried contacting ivannbb about his xb on 20's but still no response......thanks for the info guys ! any more suguestions ?

[confuzedTC]

i willl post up pic as soon i can make it happen and all the answers for people for future ref.

[midnightxb]

you might have to remove the inner plastics and roll your fenders but it shoud'nt be that bad

i got 20's on mine the inner plastics is where it rubs at and i have 225/30/8.5
had to move to smaller tires had 35 series started cuttin in to the tire
try this ling for really cheap tire prices
tire-easy.com

[ROFL Box]

yes, your gonna need to roll your fenders in the rear, and remove your front innner fender liners... as well as 'massage' the firewall a little with a hammer where the tire is close...