The Switches Thread

[mafiamike]

sheep... i've said it once, and i'll say it again... I'M FULL OF IDEAS!!

Mike... i'm hooking my door locks up to the swicth that turns on my interior cathodes. the walmart lights in the rear are on a seperate switch.

here is how my switches are configured....

1 switch operates the underbody leds
1 switch operates the Varad suspension lights (not yet installed)
1 switch operates the interior cathodes in my dash, floor boards, doors, door locks, and my 'new' walmart idea.
1 switch operates my bright ass strobes
and my underhood & grill lights are run off of hood pin wire thats for my alarm/remote start. They come on when the hood is open, and turn off when its closed.. so no 'switch' for those.
1 switch in the hatch operates the walmart lights in the rear windows
1 switch in the hatch operates the purple neons in the sub box.

I'm gonna light ip the night!!!

Here's my switch set up so far:

1 switch in the engine bay turns on my grill cathodes, engine cathodes, and headlight cathodes.
1 switch in factory slot turns on fog lights
1 switch in factory slot turns on vent LEDs
1 switch in factory slot turns on under dash/seat cathodes
1 switch under hand brake turns on cupholder LEDs, and is dependent on switch that turns on vent LEDs
knob on steering column that turned on rear wiper now turns on hatch Cathodes
I'm putting a switch in each little handle on the arm rest part on inside of the doors for the LED door locks, I know it's a lot, but I don't care.
I've got some other stuff to install so I dunno what I'll do with those yet.

[justa15kcar]

Mike, Clay and Sheep.
I'm Fuckin, confused about these switches,
that I switched my brain off!

[dredge38]

1 switch for the headlight leds
1 switch for the sub box lights and for the leds behind the clear glass door
1 switch for the led door locks
^^^^^ all of those are mounted in the fuse holder cubby holder thing
1 foglight switch stock
1 switch down by the emergancy break for under the seat cathodes
1 switch down by the emergancy break for the cup holder lights
1 hood pin under the hood for the cold cathodes under the hood
1 controller for the varad underbody kit
1 controller for the varad suspension lights mounted inside the xb
1 controller connected to two kits of suspension lights

and a few more to come!

[cz3ch]

Here's my concoction: (similiar to those already listed)

1 switch for Underdash/Seat/vent lighting
1 switch for vent lighting
1 switch to light up the audio in the back
1 switch to light up engine bay
1 switch to light suspension lighting
1 switch to light underbody
1 switch to hidden headliner/overhead lighting
-------------------------------------------------------
Total: A whole lot of fucking switches! But definately a "glow stick... I have all the cathodes from Oznium and Lighting from Varad ready. Some is installed but the overhead stuff I'm waiting on until I redo my headliner in black and make some custom molding to hide the cathodes so they are not seen...

[Anonymous]

I got you all beat. I have 1 switch that powers my non working underbody kit. O yah beat that.

[Krdshrk]

Switches? What are those?

I have REMOTES!

[cz3ch]

Switches? What are those?

I have REMOTES!

I fear the day your batteries run out :shock:

[Krdshrk]

I have replacements.

[tCMetaLFReaK]

Nick was a boy scout. He even has a spare tC in the trunk.

[aZepolyn]

ok good god, you guys have switched everywhere ... I think, when I start doing lighting, I'm going to make a little switch board to go into my center consol, or even in my glove box, or in the little cubby space, or something. If I have to walk around my car to hit all the switches I think I'll go insane.



I got you all beat. I have 1 switch that powers my non working underbody kit. O yah beat that.
^^ and to that, I have one switch that controls 3 of my 4 CCFL tubes I have inside my car :md:

[Anonymous]

I am making a huge lighting order soon adn switches galore......I want to be like Mike...... ;)

[Sinner944]

Just curious..... Can you use a switch box that you would use for air suspension to operate your lights????? Just an idea if it's possible.

[um_lunchbox]

Anything is possible .. I have switches for;

-My Neon
-My Doors (Independant)
-My Air Suspension
-My Turn Signals
-My Lights

I have also in the past used a blazer driver door panel (4Switches) in a 2 door Sonoma and used the extra 2 switches to run my air suspension.

Here is a pic of my center console, Old, pic, will update soon. Enjoy ..

http://i83.photobucket.com/albums/j295/projectbox/CenterConsole.jpg

[fsu1dolfan]

:bash: ohhh i got switches....


1 for my sub to power on/off

1 for my Knight rider lights

1 for my interior blue lights

1 for my Tcover...for those that dont know....it is an electronic set-up and manual override switch that controls the HU door...auto open when key turns on and auto closes when key turns off....plus switch to open and close on demand!!! 8)

2 for my strobe LED (white) fogs in the bottom inserts

1 for SAT radio

and 2 more on the way!!!???

i need like a central hub station for all this shit :rofl2:

[um_lunchbox]

You and Charles need switches to stop you from posting .. :rofl2:

[fsu1dolfan]

You and Charles need switches to stop you from posting .. :rofl2:

First off.... at least i add to the convo's (unlike Charles cough cough lol) and second how come your name isnt in there...you post whore more then both of us and i havent even broken 3 digits yet!!!! :up: