cz3ch
05-31-2006, 01:01 AM
Credit: Whatmovesu @ Scionlife.com
Before I begin I just want to thank spider 13 for his advice
Standard legal release you are responsible for your own destruction um, construction!!!
Also sorry for poor quality pics taken from nokia camera phone too poor with this xB payment and tuition for a digital camera :(
EDIT: In starting this how to be sure to remove the wiper by pulling off plastic cover and removing the bolt along with the wiper
1. With trunk (tailgate) open carefully pull tabs until they pop off.
http://www.euroxb.com/images/tech/rearwiper/01-02-06_1309.jpg
2. After tabs are removed you will see wiper motor remove 3 bolts holding motor to the rear and undo the one electrical connector
http://www.euroxb.com/images/tech/rearwiper/01-02-06_1307.jpg
3. With motor removed undo four screws (power tool or alot of torque needed to undo screws). Carefully remove cover until you see gearing inside.
http://www.euroxb.com/images/tech/rearwiper/01-02-06_1244.jpg
4. Slide silver arm to correct hole to allow the arm to be extended this might be year specific (doing this on an 06) for me it was the top right hole (CAREFUL do not move white gear I did this in the beginning and had to redo everything :doh: )
http://www.euroxb.com/images/tech/rearwiper/01-02-06_1243.jpg
5.Carefully reattach everything but dont bolt down the wiper. Adjust wiper. (I didn't do this and wasted another half hour figuring out why wasn't working properly.
6. Bolt down wiper enjoy (have to send a shout out to all my scikotic peeps)
http://www.euroxb.com/images/tech/rearwiper/01-02-06_1253.jpg
Before I begin I just want to thank spider 13 for his advice
Standard legal release you are responsible for your own destruction um, construction!!!
Also sorry for poor quality pics taken from nokia camera phone too poor with this xB payment and tuition for a digital camera :(
EDIT: In starting this how to be sure to remove the wiper by pulling off plastic cover and removing the bolt along with the wiper
1. With trunk (tailgate) open carefully pull tabs until they pop off.
http://www.euroxb.com/images/tech/rearwiper/01-02-06_1309.jpg
2. After tabs are removed you will see wiper motor remove 3 bolts holding motor to the rear and undo the one electrical connector
http://www.euroxb.com/images/tech/rearwiper/01-02-06_1307.jpg
3. With motor removed undo four screws (power tool or alot of torque needed to undo screws). Carefully remove cover until you see gearing inside.
http://www.euroxb.com/images/tech/rearwiper/01-02-06_1244.jpg
4. Slide silver arm to correct hole to allow the arm to be extended this might be year specific (doing this on an 06) for me it was the top right hole (CAREFUL do not move white gear I did this in the beginning and had to redo everything :doh: )
http://www.euroxb.com/images/tech/rearwiper/01-02-06_1243.jpg
5.Carefully reattach everything but dont bolt down the wiper. Adjust wiper. (I didn't do this and wasted another half hour figuring out why wasn't working properly.
6. Bolt down wiper enjoy (have to send a shout out to all my scikotic peeps)
http://www.euroxb.com/images/tech/rearwiper/01-02-06_1253.jpg