adding a rear spoiler with the third brakelight how difficult

[bheiser]

Im installing a rear spoiler with the brake light led in it, however I have a 3rd brake light in my rear window. How do I install the spoiler and wiring? Im getting off another xA.
Also, how hard is it to remove the rear emblem? I want to put the IST eagle center badge where the scion logo is.

[SciKo_SmO*xAs]

Im installing a rear spoiler with the brake light led in it, however I have a 3rd brake light in my rear window. How do I install the spoiler and wiring? Im getting off another xA.
Also, how hard is it to remove the rear emblem? I want to put the IST eagle center badge where the scion logo is.


wELL I KNOW THAT IF U GET A blOW DRYER GET IT NICE AND HOT AND KEEP THAT HOT AIR ON THE EMBLEM, THEN WITH WAX FLOSS JUST KINDA DO A FLOSS MOVEMENT IN BETWEEN THE EMBLEM AND CAR AND IT SHOULD PEEL RIGHT OFF!!

[Hotrod]

Im installing a rear spoiler with the brake light led in it, however I have a 3rd brake light in my rear window. How do I install the spoiler and wiring? Im getting off another xA.
Also, how hard is it to remove the rear emblem? I want to put the IST eagle center badge where the scion logo is.

Installing the spoiler on the xA is extremely easy. even easier if you have the template. The dealer can also install if for you fairly cheap. about $25-50. Since you have to drill holes into the hatch I would suggest having a dealer do it. The emblem removal is really easy. heat it with a hair dryer and pull it off slowly. use a razor blade to cut the 3mm tape if needed. and use goop be gone to get the sticky off.